Hi there everyone, I am new to this but I've had this house with a pool for 2 years, so i am a pool novice. i just bought a Hayward Super Pump VS 1.5hp Variable Speed Pump. I am grounding it to the power supply as per standard practice. But I am not sure what to do with the bonding aspect of this pool equipment.
I did notice the old Hayward pump; although grounded it was not bonded to anything and has been like this for many many years. My pool equipment is in a shed at least 14 feet away from the pool. The only metal part of my pool (which i have no access to) is the aluminum coping on top of which the stone coping is laid and glued, so completely covered.
Do I still need to somehow bond the pump?
I did notice the old Hayward pump; although grounded it was not bonded to anything and has been like this for many many years. My pool equipment is in a shed at least 14 feet away from the pool. The only metal part of my pool (which i have no access to) is the aluminum coping on top of which the stone coping is laid and glued, so completely covered.
Do I still need to somehow bond the pump?