Hi everyone! I need your help. I have an 18000 gallon plaster pool DE filter, and just opened pool 2 days ago-pool was a cloudy light green. I added a ton of bleach and it turned crystal blue with only some staining on the bottom of the pool in small areas.
I tested my water.
pH: 7.4
Alkalinity: 110
Calcium: 225
Fc: 0
Cc: 0
Cya: 0 (at least I think. I added water to the tube and I can see the black dot clear as day).
I just added a gallon of instant pool conditioner. Do I wait 24hrs to test again then add bleach? Or should I add bleach tonight after 6 hours of adding the conditioner?
I may need to add more conditioner since 1 gallon equals only 32ppm o a 10,000 gallon pool.
Thoughts?
My pool won't hold chlorine and this has been an issue since last year. It's very frustrating!
I tested my water.
pH: 7.4
Alkalinity: 110
Calcium: 225
Fc: 0
Cc: 0
Cya: 0 (at least I think. I added water to the tube and I can see the black dot clear as day).
I just added a gallon of instant pool conditioner. Do I wait 24hrs to test again then add bleach? Or should I add bleach tonight after 6 hours of adding the conditioner?
I may need to add more conditioner since 1 gallon equals only 32ppm o a 10,000 gallon pool.
Thoughts?
My pool won't hold chlorine and this has been an issue since last year. It's very frustrating!