Hey what's up everyone...i did a search and read up on the conversion, bought a test kit and everything and I have some results for you.
Copper - .15
Total Alk - 50ppm
Chlorine - 0.5-1(was pretty much crystal clear)
pH - was above 8.2 and darker purple than the test kit indicated
calcium hardness - 120ppm
CYA - never got cloudy so i assume it's under 30ppm
the test water was a milky green with a film on the top of the water.
if anyone can point me in the right direction i would greatly appreciate it. thanks in advance for your responses!
Current situation
Copper - .15
Total Alk - 50ppm
Chlorine - 0.5-1(was pretty much crystal clear)
pH - was above 8.2 and darker purple than the test kit indicated
calcium hardness - 120ppm
CYA - never got cloudy so i assume it's under 30ppm
the test water was a milky green with a film on the top of the water.
if anyone can point me in the right direction i would greatly appreciate it. thanks in advance for your responses!
Current situation