I have a new pebble plaster pool. Was plastered 10 days ago. Not much real direction from my PB. He did an acid start up I believe. I've taken over and am managing the pH with acid additions to keep the pH in range on this newly plastered pool. I know I need to add Chlorine now.
I'm going to use trichor pucks for now ( I know that's frowned apon ). Would it be better for add CYA to get the level to say 30, add enough bleach to get FC in right range and then go with pucks or just start off with pucks knowing eventually the CYA will rise.
With the second method I suppose I't be hard to get the FC to right level with no stabilizer on board at first.
I'm hoping w/ back washing the filter and adding water due to evaporation I can keep CYA in check.
I have a k-2006 test kit btw.
Cheers
I'm going to use trichor pucks for now ( I know that's frowned apon ). Would it be better for add CYA to get the level to say 30, add enough bleach to get FC in right range and then go with pucks or just start off with pucks knowing eventually the CYA will rise.
With the second method I suppose I't be hard to get the FC to right level with no stabilizer on board at first.
I'm hoping w/ back washing the filter and adding water due to evaporation I can keep CYA in check.
I have a k-2006 test kit btw.
Cheers