Recently installed a new pool and just finished filling it with water (Lake Michigan Tap Water). My initial readings were:
FC-0.5
CC-0.0
pH-7.5
TA-140
CH-200
CYA-0
Added 12.5% CL to get up to FC= 2.0, then started with CYA. After about 80% of the recommended amount of stabilizer, I am now at:
FC-2.0
CC-0.0
pH-7.2
TA-140
CH-200
CYA-20
Should I aerate to get PH back up a bit before try to finish the remaining stabilizer? I also need the PH to get up so I can work on TA at some point, but not too worried about that yet.
FC-0.5
CC-0.0
pH-7.5
TA-140
CH-200
CYA-0
Added 12.5% CL to get up to FC= 2.0, then started with CYA. After about 80% of the recommended amount of stabilizer, I am now at:
FC-2.0
CC-0.0
pH-7.2
TA-140
CH-200
CYA-20
Should I aerate to get PH back up a bit before try to finish the remaining stabilizer? I also need the PH to get up so I can work on TA at some point, but not too worried about that yet.