Just had our new vinyl pool opened up tgat we installed in the fall. I plan on getting it balanced then converting to swg.
I used my taylor 2006 test kit and here are my levels.
18x44 IG pool. about 29,000 gallons
Free Chlorine reading- couldnt get a reading, when i added the dpd the color would not change to pink. Im assuming be ause the chlorine is so low.
Ph- 7.0
alkalinity- 30 ppm
ca hardness- 20ppm
cya- low. I mixed the reagent and when i poured it in to the small comparator the black dot was visible even when i filled the comparator to the top. This was a reading of 0
so now what?? Im off to the store to get all the necessary supplies that pool school recommends. What and how much do i add?
I used my taylor 2006 test kit and here are my levels.
18x44 IG pool. about 29,000 gallons
Free Chlorine reading- couldnt get a reading, when i added the dpd the color would not change to pink. Im assuming be ause the chlorine is so low.
Ph- 7.0
alkalinity- 30 ppm
ca hardness- 20ppm
cya- low. I mixed the reagent and when i poured it in to the small comparator the black dot was visible even when i filled the comparator to the top. This was a reading of 0
so now what?? Im off to the store to get all the necessary supplies that pool school recommends. What and how much do i add?