- May 18, 2015
- 339
- Pool Size
- 28000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
I have a CL220 inline chlorinate that I only use when I am away on vacation. I normally just use liquid bleach, but need the automatic chlorinator to prevent algae when I am away.
I need some replacement parts for the chlorinator and want to get the pool opened and pump running without it. To block off one of the fittings in the pipe, I usually just take one of the CLX220H compression nuts, use a 6" section of tubing in it folded over and ty-wrapped closed. Do they make a compression nut fitting that has no hole in it, just to cap off the line?
In this picture, i want to replace the compression nut and hose with just a cap.
Thanks in advance,
James
I need some replacement parts for the chlorinator and want to get the pool opened and pump running without it. To block off one of the fittings in the pipe, I usually just take one of the CLX220H compression nuts, use a 6" section of tubing in it folded over and ty-wrapped closed. Do they make a compression nut fitting that has no hole in it, just to cap off the line?
In this picture, i want to replace the compression nut and hose with just a cap.
Thanks in advance,
James