Hi all, new pool owner here. Pictures are attached.
I have a 40x16 Leisure Pinnacle pool which is in the ground. The installation went smoothly until they poured the concrete coping. As you can see (I hope) from the pictures, the right side of the pool is bowed in after the coping and concrete patio was poured. It is almost 3 inches in (when measured at corner and then at furthest inward point). Certainly this is a cosmetic issue that is very undesirable to us; since we wanted a rectangular pool. However, I am concerned about the short and/or long term effects of this on the shell.
Any words of advice are appreciated.
Thanks much and enjoying the forum as a resource!
I have a 40x16 Leisure Pinnacle pool which is in the ground. The installation went smoothly until they poured the concrete coping. As you can see (I hope) from the pictures, the right side of the pool is bowed in after the coping and concrete patio was poured. It is almost 3 inches in (when measured at corner and then at furthest inward point). Certainly this is a cosmetic issue that is very undesirable to us; since we wanted a rectangular pool. However, I am concerned about the short and/or long term effects of this on the shell.
Any words of advice are appreciated.
Thanks much and enjoying the forum as a resource!