Hi all,
I am new to this forum. I reall need your help. I've had a big problem with my chloromatic ESR 300 . It displayed 60 on output reading two days ago, but both of the led lights were still GREEN.
The setting of the unit is not in winter mode. Based on the user manual, this reading should be around 100. If the reading is below 96, one or two of the led lights will be RED.
I did the backwash, cleaning cell and checking water chemistry. Everything seems OK but the reading still says around 60. How can I get the reading back to 100.
Do any of you have any thoughts on this matter? Any help would be much appreciated.
Thanks in advance.
Kevin
I am new to this forum. I reall need your help. I've had a big problem with my chloromatic ESR 300 . It displayed 60 on output reading two days ago, but both of the led lights were still GREEN.
The setting of the unit is not in winter mode. Based on the user manual, this reading should be around 100. If the reading is below 96, one or two of the led lights will be RED.
I did the backwash, cleaning cell and checking water chemistry. Everything seems OK but the reading still says around 60. How can I get the reading back to 100.
Do any of you have any thoughts on this matter? Any help would be much appreciated.
Thanks in advance.
Kevin