For the last 3 days I've been using the testing agents in my K-2006 kit that I found on Craigslist. Well, today the mailman brought me a package with some new reagents. Specifically, all three bottles to test TA. I wanted to be shown that I needed these new chems and that I didn't waste my money. Here's the before and after results:
old TA - 90
new TA - 140
I did each test twice with old and new...rather convincing results if you ask me. While I'm at it, here's the rest of my numbers for the experts to mull over and comment:
FC - 3 (dropped from 6.4 and 3.8 previous days)
CC - .2 ( holding at .2)
pH - 8.0 ( went up from 7.8 last few days)
TA - 140
CH - 280 ( raised this from 150 a couple days ago using calcium chloride)
CYA - 40
im still learning my pool, but is there anything to tackle immediately? Bring pH down I assume. How do I get rid of the CC?
old TA - 90
new TA - 140
I did each test twice with old and new...rather convincing results if you ask me. While I'm at it, here's the rest of my numbers for the experts to mull over and comment:
FC - 3 (dropped from 6.4 and 3.8 previous days)
CC - .2 ( holding at .2)
pH - 8.0 ( went up from 7.8 last few days)
TA - 140
CH - 280 ( raised this from 150 a couple days ago using calcium chloride)
CYA - 40
im still learning my pool, but is there anything to tackle immediately? Bring pH down I assume. How do I get rid of the CC?