Was running my pump after a bckwash last night and all was well. Pressure on DE filter was back to starting range of 10psi. And pump was running fine with good water circulation. Woke up this morning and presume dropped way down on DE filter to like under 5psi. Pump also was running slow and sounded weird with basically no water circulation. I tried to turning the system off (it was in auto mode) and it was stuck on. Pump control on the panel didn't work. It wouldnt turn off. Auto mode should run only per programmed schedule at night. I tried moving out of auto to service and time out modes and that turned the pump off. But if I switch mode back to auto it kicks on....and again after priming it basically runs really low and with basically no built up pressure on the DE filter.
Any ideas?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Any ideas?
Sent from my SAMSUNG-SM-N910A using Tapatalk