I just calculated what I need to add on Pool Math. For the pH, it says I don't need to add any MA, even though my TestKit says it's at 8.2.
Here are my numbers this morning if needed.
SWG system
currently using 22,000 for the pool gallons
water temp: 69
water looks great
FC: 9 (I'll dial down the pump times and salt cell %)
CC: 0
pH: 8.2
TA: 80
CH: 450
CYA: 70
Salt Level: unsure - need to call my PB tomorrow; PDA shows status at 3100; salt test kit says 2600 the first time I tested it and 2400 the second time
Is that correct that I do NOT need to add MA? Usually I have to when my pH is that high.
Thanks,
Suz.
Here are my numbers this morning if needed.
SWG system
currently using 22,000 for the pool gallons
water temp: 69
water looks great
FC: 9 (I'll dial down the pump times and salt cell %)
CC: 0
pH: 8.2
TA: 80
CH: 450
CYA: 70
Salt Level: unsure - need to call my PB tomorrow; PDA shows status at 3100; salt test kit says 2600 the first time I tested it and 2400 the second time
Is that correct that I do NOT need to add MA? Usually I have to when my pH is that high.
Thanks,
Suz.