- Dec 23, 2014
- 163
- Pool Size
- 14000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
so I've had a problem with the chlorinator not producing enough chlorine pretty much since summer started. I cranked it up from 40% for 6 hours in the beginning of the summer to 80% for 12 hours and it still didn't keep up. called jandy and they said it should be doing fine in that its rated for up to 40,000 gallons and I only have 13k. I increased the flow from1900 - 2300 as a test to just see if it would help, and it didn't. it just feels like the cell is maxed out - I see bubbles so its doing something but it just won't get me what I need. lost some cya over the summer and am replacing it but not sure if that would be enough. I'm probably adding 50oz of 8.75% every day just to keep it at a safe level. any thoughts? probably having a tech come over since its all under warranty but I really just don't have time to set a date for that for a couple weeks.
fc 4
cc 0
ph 7.5
cya 55 (would 70-80 really help stop burnoff THAT much???)
ta 75
ch 250
ran oclt a few weeks ago and it was 0 - so I'm guessing its the cell? its only 7 months old.
fc 4
cc 0
ph 7.5
cya 55 (would 70-80 really help stop burnoff THAT much???)
ta 75
ch 250
ran oclt a few weeks ago and it was 0 - so I'm guessing its the cell? its only 7 months old.