Hi
I have recently joined this forum, so be gentle with me. We have a pool that was built about 8 years ago. It has the clormatic generator which looks remarkably similar to the Jandy aquapure. We are currently getting error messages 172 and 181 which points me in the direction of the flow/salinity sensor. I have been searching on the internet for a replacement and keep coming back to the one manufactured by Jandy, R0403700. This looks very similar. The only difference is on the 8 pin connector. Mine pugs straight onto the circuit board in the clormatic box, whereas the R0403700 has a small circuit board attached to the 8 pin connector.
Is this a suitable replacement for my sensor and what is the purpose of the additional circuit. Do I need it and if not can it be removed.
Thanks in anticipation for your help and advice.
I have recently joined this forum, so be gentle with me. We have a pool that was built about 8 years ago. It has the clormatic generator which looks remarkably similar to the Jandy aquapure. We are currently getting error messages 172 and 181 which points me in the direction of the flow/salinity sensor. I have been searching on the internet for a replacement and keep coming back to the one manufactured by Jandy, R0403700. This looks very similar. The only difference is on the 8 pin connector. Mine pugs straight onto the circuit board in the clormatic box, whereas the R0403700 has a small circuit board attached to the 8 pin connector.
Is this a suitable replacement for my sensor and what is the purpose of the additional circuit. Do I need it and if not can it be removed.
Thanks in anticipation for your help and advice.