Controlling with a Hayward Pro Logic. Trying to install some actuators... Having a hard time figuring it out. Is there a special way the main body is supposed to mount? Also, it appears that it always wants to go a full 180 degrees all the time and sometimes I just want it to go 90, not sure how to tell it to do that.
One example for instance, (with * = actuator)
............Filter In
.................|
..............SWG
.................|
.................|
.................|
.................|
Spa----->*<-----Pool
With the above scenario, sometimes I want all pool, sometimes I want all Spa (a 180* turn) but then sometimes I want spillover, a simple 90* turn, how can I get it to stop at the 90*.
Next:
Filter Out -----*----- Waterfall
...................|
...................|
...................|
.................Jets
I have an actuator at the asterisk. It's wanting to either 180 shutting off the filter or waterfall (shutting down filter bad), or if I move it over, it's shutting off jets or opening everything. I usually want the waterfall on with the jets, or off. This would be a 90* turn, not 180*.
I know it has cams, so do I use these to adjust? The instructions that came with them are HORRIBLE.
One example for instance, (with * = actuator)
............Filter In
.................|
..............SWG
.................|
.................|
.................|
.................|
Spa----->*<-----Pool
With the above scenario, sometimes I want all pool, sometimes I want all Spa (a 180* turn) but then sometimes I want spillover, a simple 90* turn, how can I get it to stop at the 90*.
Next:
Filter Out -----*----- Waterfall
...................|
...................|
...................|
.................Jets
I have an actuator at the asterisk. It's wanting to either 180 shutting off the filter or waterfall (shutting down filter bad), or if I move it over, it's shutting off jets or opening everything. I usually want the waterfall on with the jets, or off. This would be a 90* turn, not 180*.
I know it has cams, so do I use these to adjust? The instructions that came with them are HORRIBLE.