Hello to All,
we used our spa/heater for the firm time this Sat night. Here's the info:
Summary
Via remote and operating manual, the Spa icon was instigated, then Heater 1, then Blower [Aux 2} once the water started to get warm. The water become warm med-hot, then the icon on the remote for Heater 1 turned off and would not turn on again for the next 25-30 minutes regardless of how many times the remote button for Heater 1 was pressed. When pressing either the Blower [Aux 2] or Gas Fire Bowls [Aux 4] or Scuppers [Water Feature] or Lights via remote, they all worked fine. When the SPA was not producing any additional warm water, the Pool icon was pressed from Spa and the valves changed and Filter was pressed to verify VSP changed from Spa to Pool correctly. No breakers were tripped when examining the control panel which was a prior issue. Note, spa temp is currently 100F, which at above 104, the heater would not work and the icon would not display
Is there a potential problem w the heater since it would not reactive even when initiated by the remote control?
Thank you,
tstex
we used our spa/heater for the firm time this Sat night. Here's the info:
Summary
Via remote and operating manual, the Spa icon was instigated, then Heater 1, then Blower [Aux 2} once the water started to get warm. The water become warm med-hot, then the icon on the remote for Heater 1 turned off and would not turn on again for the next 25-30 minutes regardless of how many times the remote button for Heater 1 was pressed. When pressing either the Blower [Aux 2] or Gas Fire Bowls [Aux 4] or Scuppers [Water Feature] or Lights via remote, they all worked fine. When the SPA was not producing any additional warm water, the Pool icon was pressed from Spa and the valves changed and Filter was pressed to verify VSP changed from Spa to Pool correctly. No breakers were tripped when examining the control panel which was a prior issue. Note, spa temp is currently 100F, which at above 104, the heater would not work and the icon would not display
Is there a potential problem w the heater since it would not reactive even when initiated by the remote control?
Thank you,
tstex