I followed the instructions inside my Taylor k-2006c kit trying to do a pH test, and this was the result I got before doing the base or acid demand test (I did this test twice). At first I did a base demand test as I figured I needed to raise the pH from under 7.0 to something like 7.6. I added 10 drops of R-0006 and the color did not change at all, so I'm guessing the pH is just THAT low? So in order to fix this, for a 25,000gal pool with my TA at 40ppm I should probably add around 15lb of baking soda, correct?
pH has always been confusing to me, so I am trying to figure out if I am doing this right or wrong.
*edit* My TA appears to be 40ppm.