Ok so I got the pool filled salted, and adjusted to these specs. PH-7.5, FC-5, CC-0/1 and I added 2# of CYA(doesn't show up on the test yet of course, and I know its probably not enough but I'm going to adjust that more after a week). So now my plan is to leave the pump off and swim tomorrow and afterwards run the pump for 6 hours with the SWG and see were the tests fall the following day. My real concern is from having regular chlorine pools in the past I know in this area I will be fighting high PH all the time and I don't know if that will effect the efficiency of the saltwater set-up or not My total alkalinity is still off the charts as well as calcium hardness(well water). Also is okay to supplement the SWG with liquid chlorine? stupid me bought the system hooked it up and tested it before reading the instructions and its only rated for 7,000 gallons and mine @90% is around 8,600 if I remember right.