pool paint

I'm using swimming pool paint (I believe it is epoxy paint) on a concrete surface. I've removed all previous paint from the surface and have now painted it over with the pool paint several times and there is cracking in three of the four corners painted. Really haven't found any solid...

Hello all, We purchased a home last year with an old concrete swimming pool, probably from the 80's (36 x 16 x 9) that is in need of some repairs and refinishing. We are located in Quebec, Canada, were winter temperatures can drop below -30c (-22f). I have read everything I could find about...

For the past half a year, the pH and total alkalinity were a little high, and calcium hardness has been a little low in my pool water. Not sure if the chemistry caused the issue, but I observed a few spots where the surface was eroded badly, and one spot even exposed the white plaster(?)...

Hi Everyone! We just bought our house about a year ago with a 17yr old gunite inground pool. Recently noticed there are quite a few spots with fallen tiles & most likely bond beam cracks, so we're thinking of doing some research and try to patch these up ourselves. This might be a very silly...