jandy truclear

  1. T

    Jandy TruClear. How do you remove the power pack cover?

    I have no display on the panel lcd screen and i suspect the glass fuse inside maybe blown. How do i open it up to check? I removed the 8 screws around there cover but it seems to be attached still at the bottom somehow.
  2. H

    Jandy TruClear HARDWIRE?!? help

    Jandy Truclear. Nothing wrong with the unit or salt cell BUT the connector corroded and broke off. I know I can get a new connector at the unit but can’t find one for the salt cell. Has anyone hard wired it? I’m an electrician and can do it. Need to know what wire from the salt cell goes...
  3. T

    Jandy pump 240 to tru clear 240 in junction with iqpump01

    Does anyone have any diagrams to set this up? My pump has the speedset control which is unhooked to run the iqpump01, both are 240v. I have 2 aux relays. The electrician did not wire the truclear with the pump and is wired standalone. What is my best option to make them communicate? Thanks...
  4. D

    Jandy TruClear "No Flow" One Year Old Cell

    First time post, been reading ever since we moved to our home with a TruClear by Jandy. I replaced the cell last year when it seemed like the problem was the cell (was about 4 years old). $400 later, I am faced with a constant "No Flow" indication anytime I am running. Flow is normal, I have...
  5. J

    Electrical Current in my pool - Troubleshooting Story

    Hi all, I am fairly new to this forum and and a new pool owner. I came to this site because of the great information here. Pool Info: New pool, Fiberglass shell, fully permitted, inspected and final'd. The electrical was done by a professional and the it is fully bonded. Equipment is all...
  6. IMG_2904.jpeg

    IMG_2904.jpeg

    Came back from vacation today. Water was flowing through the cell and the light was just green. Did a backwash, rinse, cleaned the filter. When I switch on to filter the light flashes on then right off. I can get the green light back when I hit the back button but it says nothing.
  7. michaelrbanks

    Where To Put It?

    Howdy! I'm really interested in installing a Handy TruClear system to integrate with my current setup. The manual says it should be horizontal in a 16" section of pipe - I just don't see an option without major tear-up. Any ideas?
  8. B

    Mad about phosphates!

    OK, I am a firm follower of the TFP mantra of "phosphates don't matter", so please no lecturing because you'll be preaching to the choir. I had a Jandy Pro Series TruClear Salt System last year. Just recently I noticed it has slowed or stopped producing chlorine. I contacted my installer, who...