jandy jxi

Hi, Looking for help, just had a new Jandy JXI heater installed and cannot work out if it can be programmed to a schedule, starting to think that it can’t be on its own. My old Jandy Lite2 was simple and you could select a daily schedule for the pump to run and it would heat when required...

I have a Jandy JXI heater and 2 times now it will be heating and then when it reaches about 100-101 the blower and heater turn it self off. On the display there is no error and on the aqualink app it shows the heater is still heating. I can go to the pool breakers, turn them off for a few...

I have an Iaqualink 2.0 with my pool and spa. We use a Jandy, JXI, pool and spa heater. It all connects perfectly to the app. All features and functions seem to be working well. For some reason, the spa heater will not come on. The app says standby, the heater says remote, T-Stat enabled. The...

Hi all, Looking for guidance from those with experience with new heater installs as part of a new pool build. The heater has never been able to complete the startup sequence and always results in a fault with 3 LED flashes for IGN SEQ FAILURE. My pool construction was completed early August and...

Recently had a “ Fault - High Flue” error on my Jandy JXI , bought a new Flue sensor and installed it. Error wouldn’t clear so i cleared it out by holding pool, menu, spa button for 7 seconds, go to load defaults , finished , error cleared. Manually verify heater starts up no errors and runs for...

At first glance it looks like there is a huge difference with the Jandy being 400,000k BTU vs the Aquacal 135,000k BTU. I don't mind a brand change as long as performance isn't a downgrade. We have a relatively small pool so they may be trying to pull a fast one a use a smaller heater. I don't...

I opened my pool two weeks ago. At the time, I was able to fire up the heater and it ran for about 20 minutes before mysteriously shutting down. I decided to troubleshoot this on my own which may have been my first mistake :) I used the troubleshooting guide in the "Workbook JXi Pool & Spa...

My heater manifold cracked during the Texas freeze. I realize they are on nationwide back-order, but figured there is no harm in asking. Is anyone selling or know where I can get my hands on a Jandy JXi 200/260/400, 3 Port Manifold #R0590100? If not, does anyone know what the estimate is for...