glx-pcb-main
-
P
Aqua Logic Glx-Pcb-Main RTC Issue
Hi, I hope someone out there can help me with the RTC circuit. I have purchased the super capacitor, RTC chip and oscillator. Upon initial inspection I noticed a SMD capacitor is missing C-14, does anyone know the value of this component and the +/- position to mount a replacement as well as the...- Paul A.
- Thread
- aqua logic glx-pcb-main hayward
- Replies: 4
- Forum: Everything Else
-
X
SWG Board having issues
I have a Aquarite G1-011056-1 RevC board, it was giving me trouble previously and i replaced the thermistors and it worked great for the season .. Last week i noticed it turned off so after i checked on it it seems like the black wires coming into the board from the Rectifiers is burning up and...- xclaim494
- Thread
- bad board glx-pcb-main swg
- Replies: 3
- Forum: Salt Water Chlorine Generators (SWG)
-
P
Hayward GLX-PCB-MAIN - Low Salt - Low Current
I have a GLX-PCB-MAIN which is now not putting out the full 6-7 Amp needed to drive the T-15 Cell. I have verified the Cell - it works correctly. The Board will start with 25V range - reporting 3400 PPM then quickly drop to 1900 PPM while reporting 25.5V at 4 Amp. It did start with 6 Amp...- petersmike
- Thread
- aqualogic glx-pcb-main hayward low salt reading
- Replies: 3
- Forum: Salt Water Chlorine Generators (SWG)