circuit board

I have a hot tub with Gecko S Class circuit board. When I went to heat up the tub earlier, started smelling burning smell and started seeing smoke. I shut off power immediately! A few hours later I opened the circuit board box and found that one of the cables from heater burned as well as where...

I've got a Hayward salt cell system. A few weeks ago, the diagnostic lights stopped functioning. I found some information on this website and identify that the circuit board had gone ( most likely the Thermistor ) ((Hayward Aqua Rite - No lights on, but LCD display works; what to do? )) I...

I have a 10 year old Hayward H400 FDN pool heater. It’s worked flawlessly for the first 10 years. This season I had IF (ignition fault) error and replaced the flame sensor because it would fire up but go out after about 30 seconds repeatedly. After doing this it fired up and continued to run. By...

I have AQUA Logic Display and a Hayward Goldline Aqua Logic Main Circuit Board GLX-PCB-MAIN It controls two actuators which turn on the fountain jets and are connected to Aux 1 and Aux 2 of the display. (Aux 1 and Aux 2 also control the relays, but nothing is connected to those relays). The...

Hi everyone, hoping for some feedback. I'll try and explain the series of events. A month ago, I happen to notice our pool water was in the high 90's deg. The temperature set in the Pentair mobile app was set for 65 deg, but it seemed the heater disconnected from the EasyTouch Panel and was...

Where does the comm cable go for the mastertemp from the intellitouch? I want full functionality on from inside and at the automation and all I’m finding is using the fireman’s switch to turn on/off the heater at an existing setting. I want to be able to adjust the temp from inside. Where on...

I have the IC40 Chlorinator and Intellichlor Circuit Board PN 520723. I lost power to IC40 and check the board. The black wire obviously was heated and on the circuit board I also see the black on D8 and D7 has been cracked and shows sign of heat. I have no issue replacing the IC40 and the...

Greetings Everyone, Our pool maintenance company came to diagnose why our control panel was completely off. They diagnosed a faulty circuit board and quoted me around $1,600 to replace it. Well, I found it for under $500 (Hayward GLX-PCB-BRO) and wondering if I can replace it myself. They...