Search results

I already went through a lot of wasted time and money sending the last board to a local guy to sauter, then to a repair guy that was recommended here and the board doesn't work. Then we installed it and my husband broke something on it. We were lucky the repair guy and hayward warrantied it...

I believe this is the relay he was talking about that goes bad on prologic and went bad last x but from my recollection it was the k2 that burnt. he believes the relay went bad this x. no fuse was blown.

my proplogic that was warrantied last year

From what I remember, he said that the relay was a little loose feeling but it doesn't feel loose to me compared to anything else on the board. I was in my hurry because they sent him at the wrong time when I was busy. But ultimately he said to get that board fixed wasn't gonna be that much less...

Thx. I'm not surprised you don't understand what I'm saying because I'm picking bits and pieces with the little understand I have from various places and I know I'm not being clear. I need a new motherboard and was just going to trust the tech and go with his recommendation cuz what he said...

I wrote back to the tech/dealer and they said "This is for the Prologic to OmniPL upgrade kit." from what I had been looking at the Omnilogic had more room for options but on the Hayward site it seems the Pl might have more options cuz it said "series automation" for the PL and "none" for the...

quote says: Prolologic to OmniLogic Upgrade Kit $1,675.85. Should I double check or ask them anything? Is one better than the other...? thx

I had a prologic SWG since I've had my pool. we've had so many problems with salt cells and then the motherboard in my prologic. Hayward warrantied the motherboard last year cuz the relay (if I'm remembering what the black box on the board is called correctly) went bad. That board didn't last...

I'm ready to throw up my hands and start paying the pb to start fixing everything, I think. I like to DIY when we can but we're either having some really bad luck, don't have the skill and patients, or both. At this point I'm worried the house could burn down so I shut everything down and plan...

I put a call into local pool store and the manager at store said sounds like a circuit problem. does that make sense? pool turns on when I turn on circuit manually and shuts off manually but when I push the button on the panel it says "pool off" or "pool on" but it doesn't shut it off. If...

ok. hmm. I'll have to look at the settings and configuration. The other wierd thing is I was wondering why our electric bill was so high this past mth. I don't think the pump was shutting off at all. I think it's running on high all the time 24-7 even though it's set to run on different...

pictures of the panel? All looks good from the outside. I don't know if my husband took pictures of how he installed it. I think all was color coded so it should've been a no brainer of where to plug things in. I don't think he'll even want to mess with shutting off the power and taking the...

update. We were going to backwash the pool and couldn't shut the pool off with the filter button. Had to shut it off manually with the circuit breaker switches. I also tried the pucket and that didn't work but it did for the lights. I never noticed how loud it is at the panel to shut off the...

great news. changed out the motherboard and seems to be working! I checked the FC last night and this morning and it produced overnight. Just need a little plastic piece that keeps the part where we program everything from pushing in as it didn't come with new ones with the new board and one...

JamesW, thx! RJ-45- that's interesting. Leslies told me their own brand cell (Jacuzzi) is junk. I hope Circupool is better than Jacuzzi if that's the case since I"m planning on getting circupool next x I need a new cell. Last Jacuzzi didn't last long at all, not even 1/2 yr. thx.

the new motherboard finally arrived. We will put it in this weekend. To reprogram, we just need to take pics of every single thing we see on the panel currently? Anything else? Things don't seem to go as smoothly for me as many of you here so I want to make sure I'm not missing something...

I'm still here but no new news yet. pool supply world was cheap but they r taking forever. I hope the panel arrives fine and working well. I called again today and still hasn't shipped from their warehouse and it's been a week. :(. I'll report back.

wouldn't u know, 2 websites were allowing me to purchase this morning that weren't allowing me to purchase last night so I decided to go with the less $ one, pool supply world. $300 cheaper than Leslies and $800 cheaper than PB. Hopefully they don't give the run around like I read in some...

We decided to order a board and install ourselves like JamesW recommended, but everyone seems to be sold out. James, your link at inyopool-out of stock. We found one at poolsupply unlimited for $585 but they have horrible reviews. Hayward Goldline ProLogic Main PCB Circuit Board |...

place I was waiting to hear back from said they can't get any boards, but could get a panel. $1400-$1500 for the panel plus $1k to install and program. I couldn't believe my ears, $1k! I'm waiting to hear back from pb on if they have a board in stock and how long they'd estimate to program it...

I'm posting along the way in case this is helpful to others. The Company, Hayward Board Repair, who was recommended earlier in this thread, is finally back from vacay. He said this particular error is a difficult one and with his experience he averages about 75% success rate on that error. I...

thanks for explaining this. It's starting to really feel like I should just replace the board cuz this may or may not fix it and then other things could go on the board. I'm curious, though, where does a person go to find these parts? Hayward is right down the street but I believe they don't...

correct, all we had the electronic repair guy fix was to solder the K1. do u think most electronic repair guys would know how to replace the I don't know if an electronic repair guy would know that the relay and would they know what needs to be replaced without me telling them what to fix or...

we got the part that was burnt repaired. what is a relay? we had him solder the k1. is a relay different?

I'm measuring salt at 3400 with Taylor kit. thx

I was also wondering if I should empty water before replacing board to lower salt level? thx

meaning, the guy may not have done a good solder? (not sure if u followed the whole thread that it was just resoldered). Is there a way we can tell by looking at it? I posted pics and the tip was not straight up but I have no understanding about how these things work so I don't know what to...

just got back. I couldn't find anything similar to what u showed under diagnositc menu until I typed all of this so I figured I"d keep all the info. here r some of the readings: instant salt- chlorinator off flow switch flow cell temps... vsp speed/power/+ to view main software revision 4.46...

James, thx. in meantime, what is it we r looking for? r u trying to help me save my board or get to the root of the cause? I'm starting to research other SWGs but I'm wondering if I should just call it a day and get a new hayward board. whatever I do I want to last cuz each x my SWG has a...