Search results

Yes, I believe the 925 is rated for 25,000 gallons. Given that my pool is roughly 12,000 gallons I was under the impression that the 925 would be sufficient as it is rated for more than double my pool size?

Holding down the diagnostic button for up to 30 seconds while the unit was in Auto mode did not seem to have any effect. Unfortunately, the local pool supply store sold their last tcell925swp - SwimPure Extended Life TurboCell, which I am planning to switch to as a replacement for the t-15 that...

So given that the voltage is steady around 31.x, it sounds like I may need to replace both the flow switch and salt cell. Thank you for the assistance!

Going from Off to Auto and immediately checking the amperage, it shows 0.00 and then after about 5 seconds, I hear a faint click and the amperage moved up to 0.37 before dropping back to 0. In the Off state, only the Power light is lit. When switching it from Off to Auto the Power and...

When I move the switch to Off and then back to Auto and check the readings, I get the following: 1) Pool Temperature = 84 F 2) Cell Voltage = 31.4 3) Cell Current Amps = 0.00 4) Desired Output % = 100% 5) Instant Salinity = - 0 6) Product Name = AL-0 7) Software Revision = r1.59 8) Chlorinator...

Here are the diagnostic readings that were taken 1) Pool Temperature = 88 F 2) Cell Voltage = 31.1 3) Cell Current Amps = 0.00 4) Desired Output % = 100% 5) Instant Salinity = - 0 6) Product Name = AL-0 7) Software Revision = r1.59 8) Chlorinator Cell Type = t-15 The Aqua Rite box shows the...

Recently I noticed the Check Salt and Inspect Cell lights were on solidly lit on my Hayward Aqua Rite system. I didn't think too much about this as we've had a lot of rain recently (central Florida) which tends to result in the pool needing extra salt. I added an extra bag of salt and let the...