Search results

So, after 3.5 years my T-CELL-15 appears to be dead. Salt levels are fine (3600ppm), however the panel is reading 2100 ppm, and generating very little chlorine. I've acid washed it on the appropriate stand a few times, same issue. I've been looking for a replacement, and of course checked...

One of my thoughts is if there was a relay that could take the RS485 commands for a second pump (cleaner pump maybe), and run it on the same schedule as my circulation system and run it in standalone mode. The AQR-15 panel is much more intuitive than the SolarTouch.

We bought a house which has a Pentair Suntouch Automation System. We had an Aquarite AQR-15 from our old house. The aquarite manual says that it can be controlled from a Pentiar system, so I connected it exactly as the aquarite manual said. When running, the "Remote Control" light on the...

I agree with Jim, you shouldn't rely on the flow switch as your ON/OFF switch for the SWCG. The SWCG should only be powered when the circulation pump is running, the another risk is the H2 generated as part of the chemical reaction within the cell. As long as water is flowing, there isn't...

I have an SWCG, and I love mine. I previously had a tablet feeder and struggled with keeping CYA down, and got frequent algae blooms. I travel a lot for business, so manually chlorinating with bleach won't work for me. It all depends on your lifestyle, if you can chlorinate effectively...

My guess is that the potentiometer underneath the knob went bad, should be covered under warranty. Press the display button till you get to the XXXP value, I figure it says 100P and never is shutting off.

Yeah, I looked at my boss at work with horror when he says he cleans his with acid every time the "Check Cell" light goes on. When the light goes on, I pull it and inspect it. I haven't had to clean it with acid yet.