Search results

I looked at my panel and a couple internet images of the plug-on breaker and thought it would work. I'm not opposed to neutral pig tail but a bit more research yielded that Legrand commented how their faceless GFCI receptacle is suited for outdoor use and 1.5hp pool pump motors...

Self install for a 24' AGP. I ran two 120V, 20A dedicated circuits out to a pole 6' from the pool wall. One will be for a 120V GFCI convenience receptacle fed from a standard 20A circuit breaker. For the pump, I purchased a 20A GFCI, single pole circuit braker that snaps into the neutral bus bar...

I have a used pool uprights and metal wall laid out in my shop (nearly 80' long!). I'm addressing a couple of rust spots then coating with a quality DTM paint. While I have everything laid out, is it worthwhile to coat the bottom inch or two (inside & outside) with foundation coating prior to...

Thanks for the comment. I'll be sure to treat it. I've since staked out a good location for the pool. I removed the topsoil where I noticed the subsoil is clay and in the construction industry, clay is not good to build on. But how about a pool? Since the location has roughly an 8"-10" slope...

First post after skimming the net for a forum. I took down a used 24', above ground pool 5-6 years ago. It was installed in 1997 and was in excellent condition. It's a sharkline/wilbar sendero 52". My intent is to finally re-install it at my home. Aside from a new liner & a couple of plastic...