Search results

I called a pool company to report that I am seeing no water being drawn into the pump. I feel like i am getting suction out of some inputs but not all. I ran food coloring through different combinations of pipes and it came out 1 skimmer but not the other , etc but that,s not really the point...

Everything has been perfect. Out of the blue, I get a SF code I stupidly start taking out sensors and cleaning them all off Still get SF I replace the thermistor and start getting LO (or is it L0) and then RO (or is it R0)? Anyway.. the SF is gone I still have most of the removable panels...

Ok, this is fairly confusing. Let's say I upgrade the receiver (BASE) on my primary Controls. Are the RF receivers universal? The supplier has a restocking fee on the wireless puck so I am now thinking I will update to the AQL2 Base versus my GLX base but are they interchangable or would i...

I have AQL-BASE-RF and software version 2.66 The top control requires AQL2-BASE-RF and software version 2.6 or higher. The top control requires AQL-BASE-RF (mine) and software version 2.5 or lower. So I have the older base with the newer software. I mistakenly bought the top one and of course...

Not professionally trained or anything but I have re piped my gas fire place and a few other things. I spray soapy water on the pipes after and look for bubbles. Not sure if that is a good way to check for leaks but that is how I have found them in the past.

How do I check that?

2 weeks ago, my mowers hit my gas meter hard enough to put a hole in it. I smelled gas and first thought was to shut off gas to the pool heater. More searching and found the hole. Got the gas meter replaced. Gas is flowing to hot water heater, stove, fireplace... Turned the gas back on to...

Disregard. I opened up the light and it was full of water. I dried it out and rebuilt it w/ lots of silicone caulk and now it is working.

Things have been fine, no changes. I flip the spa light on and the GFCI deal pops on an outlet near the controls. The spa and pool lights go out. I reset it. Turn the pool light on and it is fine. Turn on the spa light and once again, it pops. Is the first step just replacing that entire spa...

Looking for a wireless control that is waterproof. Lots of trips from the spa to the panel to adjust the temp. It's getting cold and those little jaunts to adjust the temp are no fun. I have an aqua logic control system.