Search results

So, I have this leak between the Multiport flange, and the tank flange where they join, but ONLY when I'm in FILTER mode. On recirculate it doesn't leak there. And it when in FILTER mode, it only leaks on one side. That seamed side used to be under the MPV (multi port valve) section for FILTER...

I noticed that if I put it on "backwash" or on "re-circulation," it doesn't leak at all. It only does it when in "filtration" setting. I just replaced the diverter with a brand new one (three days ago), thinking it might be that, so it has a brand diverter with a new gasket. All I can think is...

I did use Jack's lube on the new O-ring on the Vari-Flo. The silicone was just another line of 'insurance,' but now I've done some more digging, and it's possible I may have just tiniest of hairline cracks at that spot. I think I just have to bite the bullet and buy a whole new tank/valve unit...

Hi -- So, my 2009 Hayward S244T developed a bit of a leak where the Vari-Flo top meets the top of the tank, and you use the clamps to seal it. I needed filter media replacement anyway, so I took off the Vari-Flo top off to replace the sand with Blü Filter Balls, and added three unions on...

Hi — my tank is a 2009, and has developed a couple small "pin-hole" leaks at the seam. I tried some epoxy from the outside, but it was just a band-aid. My next attempt to save this tank is to take off the multi-port unit, take out the water/sand, let it dry and epoxy from the INSIDE, add new...

I have the same issue with my Navigator as in this thread. I did the "hang" test, and sure enough, only goes clockwise, and thus, the hose becomes all twisted. I blew into the little hole in the gearbox, and it DOES make the 'whirring' sound, so I put it back together and it still twists the...