Search results

  1. J

    Wiring AQR15 to a 2-speed pump motor w/integrated 2Green timer

    I have a Super Pump with AO Smith 3/4HP 2-speed motor w/integrated 2Green timer (see A.O. Smith 3/4 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B973T, B2973T) 115V - INYOPools.com). Planning to get and install AQR15 SWG that has the following requirement: "Wire the Aqua Rite to the...
  2. J

    Pool circulation - Please advise

    I'd appreciate advise on the present circulation. Is it OK as is or would it be worthwhile to replace return jets so that I could improve the present circulation? Pictures below show the present circulation pattern; both return jets are at shallow end pointing up and across the pool. At...
  3. J

    Jacuzzi jets adjustment - please advise

    I would like to adjust eyeballs of my two Jacuzzi jets in order to change flow direction. The attached pictures show both the pool and one of the jets. I am not able to move the eyeballs by using a pipe inserted into the opening or by vise grips - even if I loosen the 3 screws. The pool and...
  4. J

    UV system sanitation - Anyone with experience?

    To simplify my life, I am considering a UV sanitation system for my 21 000 Gal 18’x36’ gunite pool currently using Cl sanitation. My interest in UV sanitation of pool water is based on a few years of trouble free experience of a friend of mine with UV sanitation in his 10 000 Gal IG pool; he...
  5. J

    Replacement of 1 HP 1- speed motor with a 2-speed motor - PLEASE ADVISE

    Last week, I put a post on the Forum entitled ‘Upgrading single speed Super Pump to 2-speed or VS‘ but haven't got any useful response; perhaps because of a too detailed description of my issue. So, I wonder if you would kindly respond to a more direct question below. Present situation: Present...
  6. J

    Upgrading single speed Super Pump to 2-speed or VS

    Objective: To minimize electricity cost while maintaining a daily turnover of at least 2.0. Present situation: My equipment is described in my signature below. My intent is to keep the Hayward Super Pump and replace just the 1 HP motor with an appropriate 2-speed or VS motor. Using the...
  7. J

    Hayward off-line Chlorine Feeder CL 220 problem

    CL 220 installed in 2009 and initially worked ok. This season, flow does not seem to change with control valve (CV) position. As suggested by Hayward Tech Service, I removed CV, lubricated two O-rings and replaced. However, this did not help. 3 pucks are almost gone (dissolved/eroded) in 2 days...