Search results

Thanks for all the info, I just bought the TF-100 test kit and will wait and redo the test as soon as I get the kit. The go from there. Thanks again for all the help. :D

Hello, I am using a digital test kit. Also my SWG is turned down all the way.

Hello, below is my latest test of my new indoor vinyl pool. Please help me with what needs to be added or decreased... I have a.. SWG Vinyl indoor pool Pool is Heated at around 88 degree Sand filter Test: FCL = 6.67 br = 14.2 TC = 6.63 pH = 7.0 TA = 38 CH = 156 CA = 19 Thanks in advance!

The test kit I bought I thought was good. It has very good reviews all over google.

I am using this kit... LaMotte 2056 ColorQ Pro 7 Digital Pool Water Test Kit http://www.amazon.com/gp/product/B002WKK71S/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1

Hello, I got a new inground, indoor vinyl pool with a handy SWG, sand filter and pump. Also pool is heated. I just tested my pool and the numbers are below... FCL = HI ECL = HI pH = HI ALY = 23 CH = 240 CYA = 22 The HI readings I am assuming are because my digital meter was off the...

I will just leave it alone as suggested as it seems happy. Oh and yes the water was shocked with a gallon of bleach before any salt was added. My filter is on a timer to run every every 3 hours for 1 hour and heater shuts off 15 min before the pump. All seems good

The Jandy is not giving any warning signs. All of my test with the LaMotte 2056 ColorQ Pro 7 Digital Pool Water Test Kit come out within the suggested limits. How do I get a true test of the salt in the water? I know when I walk into the pool room, I can smell the Chlorine and my eyes burn a...

Hello, I have no idea how to check with the SWG as to what it thinks it is?? I only have an On/Off button and salt output button on the Jandy AquaPure Ei Series Salt Generator 120V Plug-In APURE35PLG The pool is indoor, inground, heated, with sand filter, Vinyl Liner and 12x24, 10800 gallons.

Hello, I have a new unground indoor pool heated. I also have a Jandy SWG in which the recommended salt to be added to the fresh newly filled pool with city water was 320 pounds. So I added 320 lbs of the solar salt. SWG is set at 3/4 of the way or about 75% I bought salt water test strips and...

I thought of that, another timer to shut down the heater 15-20 min before the pump shuts off to give the heater time to cool down. Also my pump, filter, and heater are all in the basement.

Hello, ok so I have a serious question.. I have a newly installed In Ground Vinyl liner pool. Its about 10800 Gallons. I have a Hayward Gas heater, Hayward Sand Filter and Hayward Pump. I have the pump on a timer and gas heater is always on, so when the pump fires up the heater will heat the...

Yes I have a shut off valve right before the pump and will be installing one on the return line also.

Hello, I been having a lot of plumbing problems with my newly installed in ground pool. The Pool is indoors and has its own pump room in the basement. I have a Sand filter, pump, Jandy salt system and Hayward pool heater. Do I need to have a check valve between the heater and salt system? I...

Thanks a bunch

Hello, I am a new pool owner. My pool is 24x12 in ground indoor and is 10800 gallons. It has a vinyl liner and the pool is heated. I have a sand filter and a Jandy AquaPure Ei Series Salt Generator. I just filled the pool with new water. Added bleach to shock the water and get the chlorine...

When putting the CYA in a sock in the skimmer, will it dissolve ? If not how do I know when to take it out?

Thanks again everyone, now I just got to figure out how to fix my leak. I am 99% sure the leak is around the pool steps gaskets. We knew it had a leak from the beginning due to the water level dropping about 1 inch per day. It stopped dropping at the bottom step gasket. I had since tightened the...

The little filter right before the water gets sucked in through the pump.

What do I use and the best way to clean the pump filter?

How often should the sand be changed in the sand filter? Whats the best way and chemicals to clean the filter?

Thanks again for all the info. I will get some CYA today and start using it after I get the salt in the pool. Not sure if any of you know since this isn't related to my original question. But My Hayward Super Pump with a sand filter seems to lose pressure. If I turn the pump on, its around...

OK great, so my next question even though I thunk it may have been answered but just want to make sure.. I added a gallon of bleach to the pool a few days ago. That DOES NOT effect the amount of salt I add to the pool right. I have never had any other chemicals in this pool since it is a newly...

Hello and thanks for your info, I will be sticking around for a very long time...I am new to pools and have a lot of questions. The pool is made by Radiant Pool. The walls are made of Steel and foam and has a vinyl liner. So what you are suggesting is wait 28 days or so before I add the salt...

Hello, I just had a indoor inground pool installed. We have not used the pool yet due to waiting for the climate control to be finished. But we are nearing the time we can use it but I wanted to get the water sanitized. So I bought a Jandy salt system and everything is hooked up. We had a lot...