Search results

How would i check and clear the lines for blockage? Since i have to drain and refill after i clean the lines, while its empty is there anything i can do to check for and where?

Im running jet cleaner through the TUB and going to clean the heck out of the pipes!! The tub sat for 3 years before i bought it... ( they said they drained it when they stopped using it ) And where we live the water has hard high metal water ( well ) So i'm hoping this helps out but I just...

To recap, it will run on low and not trip but won't run on high? I'd try jumping the pressure switch out and see if it'll run on high with all the jets on. Yeah, it will run with all the jets open on LOW, but when the jets on HIGH are all open it throws that error within two seconds. Once...

I did replace the pressure switch two days ago and its doing the same thing.....DO you still think i need to jump the pressure switch???

Ok turned those and its just water, not so bubbly . So with only 4 of 10 jets on it will run on low and high just fine...... But running all jets wide open trips the error. Let me tell you the owners manual error definition -03 Water Flow Problem ( Pessure switch is not closed when pump is...

I have the pressure switch at like 1 and year it seems the high the number i adjust the more it trips. When you say " shut the air injection off " do you mean the Dial that is low to max thats out of the water??

SO i did some checking........If i turn off half the tubs jets it WILL run on HIGH without tripping the error ( water flow issue )

How would I check/test for that>?

Pressure switch OPEN. The tub keeps temp and will run now only throwing the Pressure switch open ERROR once in a while BUT anytime I kick the jets on HIGH or cycle through the jets ( low to high back to off and repeat ) it will throw the error ( pressure switch open ) Any reason turing the jets...

Error us piping in and off again, and when i turn the jets on high it instantly trips the pressure switch open . Beginning to think i should have bought a new tub.

well, I left the hot tub on with the new pressure switch on and it cleared the error and now is running and heating!!!!!!!!!!!!!! I have not tried to turn the jets on high though with fear it might trip the error.....I can't handle another problem with this tub at this moment and dont know why...

So i broke down and bought/replaced the pressure switch and its still throwing a "pressure switch open " error code. It will turn on and run for awhile without throwing the error code, but when i turn the power back on and reset the hot tub and turn the jets on HIGH it will throw the error code...

Tried both and failed.......i am not sure my 110v is dedicated , do you think not enough power to the pump could cause this ? Never tripped a breaker but still. Here are some pics

I was researching online and saw that it could be the pressure switch needs adjusting? Also pressure switch terminals and connections need cleaning? The spa did sit for three years ( drained ) and i just has the seals on the pump replaced ( also the impeller cause they broke it when replacing...

Its a 98 Aspen Sweetwater spa, has a two speed sundance theramax pump, running off 110v right now (do have a 240v hookup that i might switch to) The tubs a four person 10 jet . If the tubs power is pulled for a few minutes and plugged back in the tub will clear the error and I can kick the jets...

Just bought a new/used hot tub, filled and when I turn it on jets come on and everything seems ok then..... error -03 ( water flow problem) it will show the error and turn off pump and heater. It will wait a minute then kick on and shut of 10 seconds later. It will then come on for 10 minutes...