Search results

Yea, I did see the chart - typically my chlorine is added by solid pucks through a floating chlorinator - I only add bleach or liquid chlorine if it needs a boost.

I just use a 4 panel Natures Way test strip - it has worked for me the last 3 years without fail. Ph - 7.4 FC 7-8 ppm Alkalinity 80ppm Stabilizer 90ppm 1 1/2 HP pump - Black Diamond 150 pleated cartridge filter

Hello all, to start I have a 15 x 30' above ground pool with a cartridge filter. 1 1/2 weeks ago, we had a storm move through on a Saturday night. We were not home and my solar cover was not on. It rained hard but for less than 1 hour. Monday, the water seemed a little off slightly cloudy...

I will double check that when I get home, but I am fairly certain it is at 0 when the pump is off

I am not 100% positive, but it does adjust when I cut off water supply or open the top of the basket on the pump. BTW, it is a cartridge style filter

I have a 1.5hp on my 15 x 30' above ground oval pool. The pump has been working fine.......until a day or two ago. Had good in-flow and out flow, pressure guage on pump has been steady. We have had ALOT of rain the last week or so, and now there is minimial inflow and the return seems weak also...

I'll take a look at it tonight, thanks

According to county code I need to bond 4 uprights, the wall, pump and conduit...... I bonded the uprights, pump and conduit, BUT.......... The pool is filled, is there an easy way to bond the wall? I know you can bond it to the bolts that connect at the wall seam, but that is covered by the...

I appreciate the feedback, I will try to take some pictures when I get home. I will advise what the installer says also. He did say that most mfg., allow up to 2" out of level, but they try to stay under 1/2"

Finished filling it up last night. Installer said it's not a problem (being out of plumb) He's coming back today. The water level does look to be about 1 - 2" higher on the skimmer side, which is also where the uprights are out of plumb. Also, I did notice the wall seam is not completely...

I just had a Mighty Sun 15 x 30' 52" oval installed over the weekend. I have a couple of the uprights on the short end out of plumb, one leans away from the top of the pool about1 - 1 1/2" and another leans into the top of the pool about 3/4". there are a couple other that are out but no as much...