Search results

New pool is being installed tomorrow. I poured a concrete pad for the equipment and am just laying everything out. The pump and filter came with a large plastic base. Do I have to use this? I don’t want everything sitting up 4 or 5 inches higher than the concrete. Nothing here is mounted yet...

I have a pool that will be ready to start filling on Wednesday. I sampled a clean bucket of my water from house to get an idea on what to expect. PH was 7.5 and total alkalinity was 230. I read the article here about lowering TA. It did say to not lower unless it’s causing specific problems...

I may try that route. Hadn’t really Thought of that.

I used to have a bestway steel frame oval pool and I cut in a Hayward skimmer. It supported it fine. That’s what I did. I did have an upgraded pump and filter and larger inlet and return plumbing as well

Yes. I understand. I am referring to running at low speed(less electricity) and lower set percentage output on swg versus running high speed on pump for a shorter time but having a higher percentage output on swg. Swg output setting would be based on run time. is the swg lifespan based solely...

Yes that’s why I won’t just run on low all the time at a lower chlorine output. Will Just run what is needed maybe on high speed. I figure the swg would last longer the less hours it is running possibly?

Ok. I’ve posted a couple times about my soon to be installed pool and and received a lot of answers. It will be a 24 ft pool. I just received a rj45 45 swg today. I’m upgrading from a big steel frame pool so I’m familiar to pools but still learning. So, I guess I’ll need a timer to run the...

Thanks. Just realized the feet of head pipe chart I was looking at was per 100ft. Makes more sense now Yes. I’ve been looking at these. Are the fibropool ones decent?

I’m getting a 24 ft Radiant pool installed in a couple weeks hopefully. I’ve decided to use a SWG with help from the site. Couple questions: 1. Should I use all 2 inch PVC and reduce at pool and pump where it is 1 1/2”? I’ll take any suggestions on plumbing I figured to put a ball valve after...

Thanks! Thats what I’m gonna do. I’m looking to get the circupool rj45 that ajw22 mentioned earlier. I’m trying to research everything so I’m ready once the pool is installed

So I called the pool company today to tell them I was wanting to do salt water. Talked to a different person this time. They said ok but acted like I shouldn’t do it. They must make a lot on the aqua smarte stuff. Of course they only want to credit $100 for not taking the chlorinator and a bunch...

There’s no requirement locally for anything. Just curious what is recommended. Thanks for the link!

Also from a corrosion standpoint, any electrical bonding suggestions? Sacrificial anode? If these questions should go to another part of the forum let me know.

Thanks for the help. I’m hoping to get the pool dealer to remove the aqua smarte chlorinator and chemicals from the price. They try to do “package deals” with everything. I’m sure I’m paying over $500 for this stuff

Ok. So is oversizing a little bit a problem? Like would 30 or 40 k be preferred for 15k pool?

Thanks. It’s an aluminum wall with some sort of acrylic coating I think so I figured it would be ok. What is recommended for a pool like this 24’ 15000 gallons. I already have pump and filter just need to know what all else I need

Hi I’m Tom. This is my first post on here. Have used the forum in the past for tons of info. We’ve moved on from a big steel framed pool to a semi inground radiant pool. I know I’ve seen all kinds of opinions on these pool but it works out for our budget and layout of the backyard. Inground...

Hi I’m Tom. I’ve been lurking on here for some time. We’ve had a large bestway pool for a few years and are now moving on to a Radiant semi inground pool. Hoping to get it up in the next couple weeks. I’ve got a few questions that I’ll post soon and look forward to everyone’s advise.