Search results

Sorry AJ, I completely forgot I had posted this. I'll take a few pics. This is a new problem, It worked correctly. This is new to me; I have owned it for about 1.5 years.

When I run my spa the heater won't auto stop at the set point. When I heat the pool the heater stops at the set point. Any ideas what needs to be adjusted?

Recently when running the spillover I have noticed water forming under the spill over and falling on to the stone. I never used to do this. Any ideas of what could be happening? I don't see any cracks.

Follow up. I got a replacement T3 from the local pool store that did the original install. Things appear to be running normal. I tested the salt again, and I am at 3200 PPM. They never explained why they installed a T3 for an 18k pool. They were under the impression that a T3 was more than...

Got it done. Picking up a new t3 this morning under warranty. This doesn't change the issue of the T3 being undersized for the pool. Do I pick up the t3 and use it for another 3 years? Do I go get the t3 and also buy another cell That's the correct size for my pool? Is there a market to...

The TF salt test shows 3200 The pool and SWG were installed on 8/28/2021

I am trying to figure out how to reset the average salt reading on my Hayward T3. I have attached the notifications in the pictures below. When I test my salt with my TF test kit it shows 3200 PPM. Does anybody run into this problem? If so, any suggestions?

Hayward Omni Logic control system

I have a Hayward T3 for my 18,000-gallon pool. I moved into the house in 2023, and the salt cell, which was installed with the pool, was added in August 2021. The SWG is struggling to keep up with the summer heat in North Carolina. I frequently need to use the "super chlorinate" function to...

Possible issue? On 6/10 at 2146 I noticed the free chlorine level in my pool was lower than I expected. I took the reading using a TF Tesk Kit. FC: 1.5 Using pool Math, it recommended I run the salt water generator at 100 percent for 24 hrs. FC on 6/12 at 1308: 3.5 The pump was off after the...

It was crystal clear the night prior. I added chemicals and the next morning it had a green tint. The difference is in the spa pic and the pool pic. I have my own test kit, the TF-Pro. I got the following the night before: FC 0.5 CC 0.5 PH 8.2 TA 60 CH 225 CYA 70 Salt 3200

Hey guys, I have a quick question. I use pool math and my chlorine levels are nonexistent from sitting over the winter with my SWG off. I used some chlorine tabs here and there but obviously not enough. So last night I added 3 quarts of bleach and 2 hours later 3 cups of 20% muriatic acid with...

I've been experimenting with my new pool extensively, accumulating a wealth of information along the way from TFP. Recently, my Hayward freeze protection feature was activated, resulting in a significant water loss in my spa due to the constant movement of the actuators. Each cycle caused a...

Thank you for the signature link, I tried to find it a few times. I will attach a few pictures below. The pool was installed by a local pool company about 2 years ago. I bought the house a few months ago, and everything was already programmed. Most of what I have learned has been reading here. I...

Another it's getting cold out question. I am a new pool owner, and I have ensured that my freeze protection is on for my Hayward Omnilogic. I have an 18k pool, a hot tub with a spillover, and a small waterfall on the other end. How do I ensure that the water circulates to all features and...

Rookie pool owner here! I have been steadily losing water in my pool. At first, I thought it was just the NC heat, but have realized it is not. I performed the bucket test with the pump off and I lost about an inch of water in 1.5 days. I bought some dye and went looking in all the common places...