Search results

Just installed my DIG-220 and noticed that under the temp and salt calibrations settings were not at 0 from the factory. Temp = +2 and Salt = -14% Is it possible the factory tested and calibrated/adjusted settings for ship? The unit really looked new and not a return. Temp is off a few degrees...

You guys rock! Super big help thanks to all!!

Trying to help a friend out who just purchased a used AG pool. Does anyone have any idea what brand sand filter this is? All the markings appear to be weathered off. Hoping someone recognizes the star logo in the middle. If I knew who makes it perhaps I can figure out the model on their...

To wrap this up and for anyone searching in the future here is what I did: Poured a little concrete footer around the perimeter to support the back end of the block. Then used mortar to affix the block. Decided against epoxy for a number of reasons; cost, availability, ability to level, etc...

Update: Received TF-100! Haven't had a chance to check it out yet. I've been dumping 2gal of WalMart generic bleach every two days or so. Trying best to evenly disperse the bleach as I run around the pool pouring it, and splashing it evenly across the middle. I also brush the pool walls/floors...

Thanks for the responses gentlemen! I did phone Hayward again and pointed out their AQR15's rated capacity vs my gallon needs. This cust svc rep agreed the cell would most likely would be over-worked and burn out quickly. He suggested I install two AQR15. That option doesn't really excite me...

Ale_Brewer: I should have mentioned - No PB this is a complete DIY. It has taken me a year to get to this point and I did not want to go through another winter with an exposed pool bottom. So I elected to drop in the liner and fill it up. Was hoping to have equipment in a little sooner but as...

I've called both companies looking for SWG recommendations for my size pool. Hayward recommended AQR15: My concern is the cell is rated for up to 40k gal. My pool is 42k gal. While the cell may be able to supply sufficient chlorine I wonder if the cell will have short life span due to running...

I've just filled my 42k gal vinyl pool and in the process of selecting equipment and waiting for my TF100 to arrive. I have been reading up in the Pool School section, and wondering if I should dump some liquid chlorine in the pool to help prevent an algae bloom while I wait for equipment. As I...

Curious, do you think sealing the outside/lip/area with silicone would have prevented the failure? Several of the negative Amazon reviews point towards water leakage. I'm wondering if sealing the unit before installation might help them last. I admit we shouldn't have to do that to a $500 item...

Have a link to the reviews? Only ones I can find are on Amazon or Leslie Pool supply and they are not very flattering.

Hello all! Working on a DIY pool install and looking for some opinions/advice on installing coping stone (24x12x2) to the top of the steel wall on a vinyl pool. My original plan was to pour a 12" concrete footer around the perimeter of the pool and float some concrete onto the top of the wall...