Search results

Thanks for the reply - great information. I'll check the voltage from the power supply before and after and see what it is. Kind of hesitant to open the motor assembly as I feel like any sealed thing is never the same once it is cracked open but if the problem persists or gets worse I guess...

Hi, Have a two or three year old Dolphin S200 that has started only running for about an hour then stopping. When running it seems to be working perfectly - forwards, backwards, climbing walls, impeller etc. Impeller / impeller shaft is clean. If i run it out of the pool, upside down in...

That seems do-able - I will look into that, thanks. The catch tank / basin is the inlet to the filter - kind of like a really big skimmer box - so the pool is being turned over through it whenever the filter is running.

Oh dear - that does not sound easy nor cheap. I will try a SLAM and try keeping the FC levels a bit higher at 7 or 8 as Auspool does above, and brush regularly as an interim measure to try and keep it in check. I wonder if and acid wash, clean and then painting the catch tank with 2-pack pool...

The algae tends to be on all 4 walls of the catch tank below the current water level. The overflow wall stays pretty wet for a long time. The other three walls of the catch tank are dry except for a 5cm / 2inch damp looking band above the water line where I guess the water is soaking up into...

Hi, The catch tank is the inlet to the filter. So unless I’m running the vacuum the filter is drawing from catch tank and outputting into the main pool so the water is basically the same. I run the filter for 4 hours a day and, from memory, that was about enough to turn the whole pool over. I...

Hi, The catch tank of our wet edge / infinity edge pool just has a plain plain troweled or brushed concrete finish and we are constantly having green algae appear on the walls below the water level. The main pool is coated in pebblecrete and does not seem to have any problems. The chemical...