Search results

I shook the hoses and I assumed all the water was out of it.

Got my diver dave vaccum today. Have it hooked up and running right now, however every now and again the vaccum will come up off the pool floor. Eventually it will fall back down. I tried adding and removing hose so I am curious if anyone else out there is experiencing the same thing and if...

Can you supply me with the combination of fittings you used for the 2 inch side? No matter what fittings I use I cannot get a tight enough seal.

hard plumbed everything today and WOW what a difference over the hoses, however I have one freaking leak, exactly where I thought it would be. I disconnected and the filter and cut the power to the pump that part is fine. Then I ran directly from the hayward DE filter to the SWG piece of the...

Sorry I posted too soon. It looks like Lowes has them on their site. Thanks for the help. I would still love to see pics of yours and if possible what wires you disconnected to take power away from the filter/pump

Do they make a 2" box adapter?

I would love to see some pics cause the box adapters (electrical adapters_ are 1.5 inch and they would not seal properly with the intex nut for me anyway

When you decide to hook this up from a filter directly to the SWG, how do you plan to hook the pvc tot he SWG since the one end of the unit has a much larger connection?

Ok I see that part. My next question is, when using the combo unit the PVC from the filter that leads into the swg is larger than 1.5 inches. Anyone have a solution for hooking into that, similar to using the box adapter?

I have read you can disconnect the power from the filter pump from the intex swcg combo unit. Does anyone have instructions on how to do that?

I think that is the direction I may go in. I might tidy it up with some railing and such but it's the same idea. You have any pics to share?

I am talking about an ultra frame. I am thinking about mimicing one of those resin decks you can buy from intheswim.com but was curious what others were doing. The ladders are about as insufficient as the pumps that come with the pool

Has anyone come up with a solution other than the intex ladder and building a deck around the pool for entry into an intex pool? I am struggling to find a suitable ladder and don't want to build a deck around the pool till I get a real AGP Any insight is greatly appreciated.

Thank you mpacheco72 the list definitely helps. I am assuming the single union ball valves allow you to disconnect in case it's necessary? Do you have any pics of your setup?

As soon as my setup is complete I will post some pictures. I did not go with the widemouth. I went with the square one and I mounted it as high as I possibly could. I cut right along where the seam meets the wall.

I want to hard pipe my intex 16 X 48. Thanks to all the input this forum has given me. I have installed my hayward skimmer and I would like to replace the intex return nozzle with the return that came with the skimmer. I would also like to hardpipe it. My question is when I connect PVC to...