Search results

  1. Circles47

    Algae Keeps coming back

    Looks like the CC is 1.5 if the TC is 8.5...
  2. Circles47

    CYA numbers don't jive......

    Tammi, I started out using 12.5%, ran out, and bought some 8.25 locally. I ran out of that too, and bought some more 12.5, which finished the job. I'm not sure if some bleach is less effective than others. I am pleased to say that I finally passed my OCLT the night before last!
  3. Circles47

    CYA numbers don't jive......

    Update: Stupid algae. I've been trying to maintain shock levels for a week. I say trying, because I need to go to work to pay for the chlorine...probably somewhere around 20 gallons by now. Have checked levels on the average of 5 times per day, and adjusted accordingly. Have brushed until my...
  4. Circles47

    CYA numbers don't jive......

    With my test kit only starting at 30 CYA, how would I know when I'm at 20? I KNOW there's some CYA in there, and am assuming it's close to 20 already.....
  5. Circles47

    CYA numbers don't jive......

    Re: Can CYA tester get old? I know. There was an above average amount of stress leading up to this trip, and I should have instructed more diligently, however, at the time, it was the least of my concerns. This week, I'm paying my dues! :? No offence taken, duraleigh. Last year, after my CYA...
  6. Circles47

    CYA numbers don't jive......

    This spring I opened up the pool to perfection. Numbers were perfect, water was clear, etc. The CYA was right where it was when I closed last fall....at 45. After my initial test, I didn't check the CYA again, because it never reallly changes much. However, my pool care had become a little...
  7. Circles47

    CYA levels in a salt pool without SWG

    Ok, so I was doing more than thinking! :mrgreen: Actually, I had already bought 200 lbs of salt, and a salt test kit. Because of my water replacement this spring due to high CYA, my salt levels were around 350 ppm. Pool Calc said to add 213 lbs salt to reach 2000 ppm salt content, so my...
  8. Circles47

    CYA levels in a salt pool without SWG

    OK, thanks Linen for the prompt reply!
  9. Circles47

    CYA levels in a salt pool without SWG

    I'm thinking about adding salt to my pool without installing a SWG. I believe I read somewhere on here a recommended salt level of 2000 ppm, vs. a higher level when using a SWG. Now I know that CYA for a SWG pool should be 70-80, and 30-50 for a regular pool. My CYA is currently at 40. My...
  10. Circles47

    Trex decking at pool edge

    ]Not exactly sure what you're looking for, and I realize that mine is an AGP instead of an inground, but Trex CAN be manipulated as the picture shows.
  11. 0412121917.jpg

    0412121917.jpg

  12. 0412121917.jpg

    0412121917.jpg

  13. Circles47

    Opening Time?

    Here in Ohio, we're anticipating a warm week and weekend, so I turned the heater on yesterday morning. The water temp is now 87 degrees, and we've been swimming for several hours. I know it's going to cool back down, but at least we can enjoy it for several days! :-D...
  14. 0503121516.jpg

    0503121516.jpg

  15. Circles47

    New to pool - but just got my test kit! woot!

    Yes, CYA is usually added at the initial filling of the pool, to protect the chlorine from the sunlight. Lots of pool owners, myself included, have had issues with high CYA due to a lack of understanding with using the chlorine pucks. Each puck used raises your CYA just a bit, and once CYA is...
  16. Circles47

    New to pool - but just got my test kit! woot!

    That's a real bummer! My CYA was high when I opened a few weeks ago, around 100. I went through all the same emotions you are, thinking surely there has to be another way. A couple of days later, algae began to grow in my pool, and I began to see just how much chlorine it was gonna take to shock...
  17. Circles47

    Opening Time?

    Been tossing it around too, Shaun. I'm in Ohio, and it looks like the temps are going to be consistently higher for the next couple weeks. I actually opened mine several weeks ago, and had to do a partial drain to reduce my cya. It's now crystal clear and well balanced, and I'm wondering if it's...
  18. Circles47

    Opening levels and "high" CYA

    1 last picture of triumph. Thanks again to all who helped! I don't think the water has EVER been this clear!
  19. 1DSC01746.JPG

    1DSC01746.JPG

  20. Circles47

    Opening levels and "high" CYA

    Here's the results of the OCLT test last night: Evening - FC=7.4, CC=.4 Morning - FC=7.4, CC=.2 :party:
  21. Circles47

    Opening levels and "high" CYA

    Yep, I'm a plumber, so I have lots of pipe and fittings to play with. Made it last year when I read on here about high TA and raising PH through aeration etc............ Works really well! It's been running for 45 minutes, and has raised the PH about .2.
  22. Circles47

    Opening levels and "high" CYA

    Thanks for the input Dave, I'm in the middle of it as we speak (type!)
  23. Circles47

    Opening levels and "high" CYA

    Thanks again for all the help and guidance! Here's the pic, in the midst of aeration.
  24. 0417121804.jpg

    0417121804.jpg

  25. Circles47

    Opening levels and "high" CYA

    Hooray! After a massive dump/re-fill, my CYA is down from 100 to 35! I know that with it this low I'll have to keep an eye on it, but if I keep it at the lower end of the scale, I can add some tablets if we go on vacation without worrying about it. Here's my new numbers: FC - 7.4...
  26. Circles47

    Opening levels and "high" CYA

    Well, I'm slowly learning. I'm starting to see that proper pool care isn't really all that complicated, but rather it's us people who are great complicators! I surely appreciate all the sound and prompt counsel I've received on here. :-D Dropped a sump pump in the pool, have lowered it about...
  27. Circles47

    Opening levels and "high" CYA

    Yesterday I shocked the pool up to 33.5 ppm FC, and 1 ppm CC, even though water was clear. This morning, shock levels were at 30 ppm FC, and .5 ppm CC. But......while the water was clear yesterday before shocking, this morning it was milky white... :( I can still see the bottom of the pool, but...
  28. Circles47

    Opening levels and "high" CYA

    Why would your CYA be zero at opening? I thot CYA remained until a water refill?
  29. Circles47

    Dane's "How To" for a quick & easy pool cooler

    I realize that this is a late post to an idle thread, but doesn't your PH skyrocket with all the aeration?
  30. Circles47

    Opening levels and "high" CYA

    Well, thanks Butterfly! Guess I better start draining/refilling......not sure why it seems like such a task! :)