Search results

anyone in the phoenix/tempe/chandler/gilbert/mesa area ever purchased LC from A&M? I called, and they said it was $18.98 for 4 gallons of refillable 12.5% ( $8 deposit). I am currently getting 2 gallons of 10% at my local pool store for $7.99 ( Kem-tek was $5.99 at frys/kroger until a couple...

Long story short - after replaster the guys installed a new pool auto float for some reason The water level seems to be about .5 - 1 inch too low. Do I raise or lower the actual float to increase water level height? Thank you; hope this makes sense. :)

just drained pool for new plaster/waterline tile, and pool is filling up right now pool is 20k and I plan on adding it to them skimmer, about 5 pounds to get CYA around 30. Should I backwash before as the package states? my normal reading is 10 PSI, and before it was drained reading was about...

Hi all So I drained my pool Sunday night(and turned off the autofill valve), and noticed when I attempted to turn the valve off, the water did not completely shut off. I had to rig the float valve, put a brick up against it, in order to stop the water. Any ideas? Thanks for everything.

Hi if I am testing FC using 10ML of water, should I only be using 1 level scoop of DPD power, or 2? My FC is usually between 4-8

Hi all So when doing the test, back facing the sun and vile at waist level, I got that part. When looking down at the dot, should it be in sunlight or in the shade? As in, should the CYA vile be in the sun or shade?! It makes a difference and I am not sure the best way to do it Thanks to all of...

HI all My water level is too high, which is somewhat inhibiting my pool skimmer. I have an auto-fill, but can't figure out how to adjust it. I need lower my waterline by about half an inch or so. It's a standard auto-fill, nothing special. Any help would be great!

Hi I tested about a month ago and CYA was approx 20. I stopped using LC, and started using tables in an attempt to get it up to 40 or so. I tested yesterday afternoon, and with the vile filled all the way to the top(above 30), the black top was barely visible, which I assume makes my CYA 25-30...

cya - 20 black dot was foggy with vile filled to the top PH 7.4 FC 4.5 CC .5? TA - 80 CH: 350 water in 90 degrees in phx and 110 outside lol use 1/2 gallon of 10 percent LC nightly feedback please?! feedback

Hi all long time reader here; got my test kit today Did the CYA test at lunch, and the dot never disappeared ( it was a bit foggy), so I assume CYA between 20-30. The water is 90 degrees, does that make any difference? Also, as in phoenix with temps over 110, the reagents were a bit warm upon...