Search results

Looking for a robotic cleaner that is capable of cleaning two bodies of water, a pool and a spa. Not sure if this is even possible. Thanks.

I am using a Taylor K-2006.

Thanks for the info. I should be able to make something like that.

My TA is 110. In the pool math app, it says reduce PH to7.0 and aerate to increase PH. What is meant by aerate?

I opened my pool and mice made a nest in the corner of my step. The finish is stained. Looking for advice on how to clean it.

i was using this as conformation to the results I was getting using my K-2006c.

I would want to stop the pumps and any equipment. Just as an added saftey.

that is what I am looking for. Thanks.

i thought i read it someplace. Not sure where. Either way, it would be a simple code to put in.

Was able to keep FC over 7 this weekend. Slowlyy bringing up CYA. HAd it tested at Pool store. Got the PH up and is stay about 7.6. Was just shocked in 3 days having such a drop in FC. Thanks for the help.

I thought i read that the OmniLogic has the ability to have an emergency stop switch. Does anyone know how this is wired? Thanks. steve

I found a dead mouse in the simmer basket. Could that be the cause? FC is coming up will test again later. Will look into overnight test. I will also try to get the PH up today. thanks for your help.

water is clear. Added chlorine. will test in a few hours.

i was away for three days and my chemistry is way off. We had a lot of rain, had to drain 3" of water. I tested after cleaning (not very dirty) and draining. Any suggestions what could cause this. Never had this big of a swing. FC went from 5.0 to 0.2 PH 7.6 to 7.0 TA stayed the same at 70...

running at 50% till i figure out the right speed to run.

I finished my pool after 2 years of DIY, Plaster (pebble fina) was done yesterday. Balancing going as expected. 1) should i be suctioning the same from skimmer and main drain, or should i be suctioning more from the main drain to catch the dust. 2) presently running VSP at 50% that gives me 70...

This is a new owner built pool, plaster finished yesterday. When running VSP at medium speed, the pressure on the filter is almost 0, on High it is about 6. Is this normal?

and i would assume ballancing the water?

question is fill day considered Day 1 on the NPT startup? I am filling today, should i start the ballancing today once all the equipment is running.

i did now. thanks for the link.

i have a call into the water truck company and will get that info.

after startup i will be switching to a salt system.

at this point I am not sure. I will check with the water delivery company.

I will using a Taylor K2006c. I calculate about 24k gal. I will be using the National Plaster Council Standard start up.

I am weeks away from finishing my pool. The finish will be Pebble Fina steel grey. What quantity of chemicals do you suggest to have on hand to start.

Moved from HERE can i ask were did you buy yours?