Search results

My hayward H400 heater fan started running 24/7 a couple of weeks ago and now flashes error code "PF" which is supposed to mean either reversed polarity, low voltage, or improper ground path. The heater has worked fine for two years and no one has changed anything related to the electrical...

I live in Vegas and we are just a little cooler than phoenix in the summer. I have solar on my pool/spa and we swam until about Oct 15th. When I heated the pool ( 15k gal) from 65 to 85 in may with my 400k btu heater it cost me about $20. I have a spa that heats up from 85 to 104 in about 15...

My plaster pool is about six months old and I have exactly the same rise in pH (from 7.2 to 7.8) in 4 to 5 days, but never seems to go above 7.8. Is there any harm to the pool in just letting the pH stay at 7.8, or do I need to keep adding a quart of MA acid every 4 to 5 days? :cheers: :cheers:

Thx -I understand now. Much appreciated.

Thx - added liquid CYA to increase my CYA to the 60-70 range (from about 20). My SWG has been running at 50% and my pool filter runs 10 hours a day at CYA level of 20. This has been giving me a 3.5 FC reading. Should I expect to reduce the SWG run time since I've increased the CYA to at 3.5 FC?

Live in Las Vegas...water is extremely hard here. Does aeration help after lowering pH?

Re: Goldline T-15 Cell - What does "Instant salt" setting do Thanks Jason

I have a Goldline T-15 cell and in the set-up menu it asks me set an "instant salt" level. What does this mean?

I have a new pool with a SWG and am trying to get the water chemistry balanced. I got my Tf-100 kit yesterday and got the following results: pH 7.8 FC 3.5 CC .5 (so I guess this means TC = 4.0?) TA 130 CYA 20 CH 570 (we have very hard water here and the pool store says there is nothing to do...

In the morning when my pool pump turns on my salt reading is 3300 ppm but after it runs for 4 hours the salt reading drops to 3100 ppm. Is this because the SWG is breaking the salt molecules into FC, thereby reducing the salt level? About two weeks ago I Added salt to my pool and turned on my...

I am a new pool owner and have a hayward ecostar VSP pump which is used to pump water to my filter and solar system and returns through my in floor system, unless i change the return to fountains. I have my solar system on top of my single story house and only run my pump at about 65% when my...

Thanks - after running the 10 hour cycle yesterday my FC is 2 this morning so i guess I am very close.

I have a new pool and added my salt today so could begin using my Goldline T-15 salt cell. The salt cell is controlled by a Hayward Goldline Pro Logic (PS-4) controller. My salt level is 3000 ppm and i am waiting a day or two to make sure the reading is correct before adding more salt to bring...

I had a similar problem with my pro logic controller which gave me the "spa sensor open" error when i choose the "dual" setting in the configuration menu. After studying the manual it seems that the "dual" setting if used for unconnected spa and pool. I have a spa that spills into the pool so i...

Re: Hayward Goldline PS-4 Controller and Solar Valve Operati Thanks. I talked to the Solar Installer and he told me where to find it. It is much smaller than I thought and is located at the highest top corner of my system. I have got everything working good at this time. Appreciate the info.

Re: Hayward Goldline PS-4 Controller and Solar Valve Operati This is a photo of my solar pluming. Are either one of the black valves a Vacuum relief valve or are they both back flow check valves? I can't find a VR anywhere else, and am afraid to walk on the tile roof. Thanks for the info on...

Re: Hayward Goldline PS-4 Controller and Solar Valve Operati Thanks for helping me. I looked for that yesterday and can't seem to find it. Do all solar systems have to have one? I have Suntrek.

Re: Hayward Goldline PS-4 Controller and Solar Valve Operati Thanks for the info - I probably should have prefaced my questions by stating that I am completely new to pool ownership and had to fire my pool builder after the pool was built as he knew nothing about configuring and programing the...

Re: Hayward Goldline PS-4 Controller and Solar Valve Operati Thanks. My pool water sensor is located between the pump and filter and seems to work fine until the solar valve is turned on. Should the valve switch be in the on1 or on2 positon, or does it not matter? Could the fact that the...

I just had a new pool built (with Solar) and it is controlled by a Hayward Goldline PL- PS-4 (solar sensor is installed). The solar is controlled by a Goldline GVA 24 Electronic valve wired to the valve 3 relay and it is in the on1 position. I have the Solar turned on (enabled) in the Config...

I just purchased a Hayward Ecostar VSP with my new pool and it works well, runs at 35% on 100 watts, and is fairly quiet at lower speeds. At speeds above 65% it becomes increasingly louder and at 85% it is downright annoying. Mine was mounted by the installer very close to my house (on...