Search results

I am looking at ways to reduce my VSP from running on high and such and to increase my flow I am looking to open all my intakes and have all my inlets open. I figure more ins and outs is best way to improve flow. My question is that I have been told that I need to turnover my pool volume once...

I have been in the process of replacing my old equipment and using a simple automation system through Hayward that came with my Tristar 950. The omni hub has been working great. Recently I had to remove my pool cleaning companies provided salt system and in my stupidity I fried my Omni hub...

I mentioned above, I had to test the relay the were hooked up to and in my brain fart I hooked them up to my other relay on the downside of the transformer, instead of before the transformer.

I purchased through Wholesale Pool Supplies here in Phoenix as well as my nephews pool guy for the spa light cause nobody else could find me one and he did. So probably going to have to claim on my amex?

So you all may have seen my thread earlier this week. Was having issues with my Hayward Universal Color Logic Lights. I was able to get them working as the first issue was due to a bad connection. But I still had an issue when they were on, they would blink off about every 30 seconds for just...

Well, I should have heeded everyones negative reviews on the Hayward Universal Color Logic LED's. Was I so wrong to want something that matched the Omni Hub, cause I have had that for over a year and it rocks. So installed the lights, to the Junction box (3 lights) then put in a GFCI breaker...

Realized that it isnt 210 volts. Cause the spa is only 35

yeah , it is 3 of the colorlogic @70W. I just called my neighbor who is an electrician and he is going to come help tomorrow so I do it right

Thanks for the input. I am going to use the same converter as you did. I am also going to make sure the Pool panel has a GFCI breaker powering before the relay. Do you have an answer about the junction box?

My pool lights went out and I am finally fixing them. I had Pentair Amerlite 120v and just purchased the Hayward Universal Colorlogic 12v lights. I know there are Hayward haters out here but I have a Tristar 950 with the Omni Hub and it works for me and I wanted the color and show control I...

Thanks for the input. I am using a FlowVis. I did notice that my pressure gauge was wrong and i am only at about mid 20's. The GPM is through 1 skim basket. It doesnt seem to change if I switch and open the side suction vac. I just wish I had more flow so I could run the pump at lower...

What about the flow? For a pump rated so high isn’t 70 max pretty low?

Thanks for responding but I am still looking for info on that flow rate and system pressure.

Hey all. Thanks for the help in advance. I purchased a house about 1.5 years ago and it came with some pretty old equipment. Has a sand filter that I believe is a Triton TR100 and had old pumps. 2" plumbing. I replaced my old single speed pump with a Hayward Tristar 950 VS with Omni Hub...

Hey all, I currently have a side suction vac and want to move away from it. My pool is about 32,000 gallons and is about 9 feet deep on the deep end. Was looking at the Polaris VRX IQ+ from leslies or the non exclusive ALpha IQ+. When is the best time to buy? I saw last year they did 10%...

So, I am an idiot. I installed a Hayward Tristar 950 Omni and a salt system this spring (myself). And I left the breaker box needing organizing and some rewiring. I worked on it a few weeks back and redid the wiring. Added lights for our Basketball court and ran the wires so I have...

Like if my debit card clears? Ha ha. Not much to go wrong when buying a new one.

I mentioned that I have no way to test the gas pressure. I know that I have 2" pipe running to it and there is gas to the heater. I know the ignitor is heating as it is glowing when on. I think I am going to return all the parts I bought and take the $700 and put it towards a Raypak or a...

I have no clue if the pressure changes when the heater tries to fire. I do not have tools to test that. Model number is: 460736 I can see water exiting the heater through the clear top of the one way valve Igniter is working as I can feel the heat. I actually broke a yesterday when I...

So I am having some issues with my 2014 Mastertemp 400. (See other posts) Looking at the Raypak 400,000 or the Hayward. I run the Hayward Tristar 950 with Omnihub. What do I get going with the Hayward for connectivity over the Raypak? I coulds do the Raypak 2 wire, what do I get with the...

What regulator did you replace? Pentair/Sta-Rite Combination Gas Valve MasterTemp/Max-E-Therm #42001-0051S | PartsWarehouse Check the gas pressure. It is good up to heater Are all of the gas valves on? Outside heater, yes What voltage is connected to the heater? 110 Is the correct voltage...

Replaced the igniter. Still nothing. So next step new Gas regulator maybe? I just replaced in March

So i went to see if I get an error on the ignitor and I am getting 3 blinks which is an ignition lockout

No. It goes awhile with blower (like 5-10 min) but no heat

I am not hearing the ignition of a flame or anything other than blower. How do I check inlet pressure?

So Solved the issue earlier of error lights. Just put in new board. Heater starts up, no errors. Although when initially powered on the "Service Heater" light comes on for a second or two then goes away. Blower comes on and "Heating" LED is solid. Then nothing, after a few seconds the...

this issue solved. Going to add new thread with new issue now

I purchased it used off craigslist and it looked almost new. Date shows 1/08/2014.. I paid like $300 which was a steal but had to replace the gas regulator and that was a few hundred dollars. After that it worked great. Hadnt used it in a few months due to my pool sitting at 88 degrees...

Used

To me? 6 months. But it is like 2 years old