Search results

If I want to use the remote controller, do I need the interior wireless receiver or only an antenna at the panel? What antenna and controller will work with this system?

If i go the remote route instead, do I still need the protocol adapter? Pic attached

The pool is in service mode because we are in the process of opening it. I do not have a protocol adapter. I will need to find one. Thank you

This is what I plan to buy locally from someone. What else will I need?

I just bought a 2nd home which has a Pentair Easytouch PL4/PSL4 setup. I currently am a longtime Hayward person, so I am very familiar with their systems, but new to Pentair. The pool has a spa. There antenna mounted outside, however all the interior equipment is missing. I need to know...

about once a month my pump randomly trips the breaker. Any ideas where to start troubleshooting?

Thanks everyone. i will increase it

My math matches what you posted? wheres the confusion?

Pool Math says if I run my pump for 9.75 hours, will increase my ppm from 3 to 4 on a T-9 at 40%. I never lost more than 1 ppm a day last year so it held constant

my stabalizer was higher last year.. I am going to up it to 80 and see if that solves it. 1.3 ppm a day should be plenty for my pool to maintain

I ran a 40% all last year with no issues and have other friends ran the same size pools and set ups also running at 40%. i’ve never burned 3 ppm a day

Kit is K-2006. I hear ya on the SWG math, but i’ve never heard of running for that long on the pump or 100%. I do start to develop alagae when the FC gets to 0. It goes away as soons as I get levels back up

FC: 1.5 CC: Showing not present. (added 5 drops after FC test, and did not turn back to pink using taylor technologies DPD test kit) PH: 7.8 TA: 70 CH: 200 CYA: 60 I also used the Taylor Tech Sodium Chloride Test kit. I've done an overnight test, no significant loss. SLAM pool twice in last...

I have a Hayward turbocell t-cell-9, less than 1 year old, worked perfect last summer. I would run it at 40% to hold my chlorine levels. This year, it doesnt seem to be holding at 40%, and may not even be producing cholorine. I seem to be losing about 1/2 a PPM per day, and am currently...

Sorry for delayed response. Been away. TA is 60. PH is at 7.8. FC is 4.5, CH is 210. CYA is around 70-80 cant recall, but not high. Doesnt usually exceed 8.0. Typically if it is super pink. One drop of the Acid Demand drops it to 7.8, so its never too far off. I guess if adding 1...

I switched my pool to a SWG about 2 months ago, and I find my pH constantly hovering around 8.0. I have to add about half a gallon of Home Depot Muriatic Acid about every 2 weeks to get it down to around 7.6. I have gone through 2 gallons in about 2 months now. 21,000 gallon pool. Any ideas...