Search results

Hahaha!! Made me laugh & I'm really needing that at this point. Or, maybe I'll just go directly for the adult beverage!! Guess I'll go reverse the hoses also, just in case your theory is correct. I'll let ya know how it goes :)

Thanks!! I knew I needed to water exchange, like you said, no way around it now. With a fiberglass I obviously can not drain 1/3rd all at once. Will I have the same result by putting my vacuum hose at the bottom of the deep end & the hose at the shallow end and exchange all at once?? or do I...

My tap water test: pH 7.2 TA 330 CH 160 TC 0 I also forgot to mention the fact that we have a rock coping that is cemented down and we now have a calcium scaling on the cement that is under water (only the cement not the rock). I don't know if this is causing a problem OR if it's scaling...

Okay, having a BIG problem with TA in my pool. So high right now I can't get a reading. I admit that I have NOT been keeping up with it due to summer time activities. I have been testing my FC and pH only & thought I was okay until I did a full test yesterday! I was reading on this forum and...

we used our well water in South Texas (no choice where we are) and have not had a problem getting our water balanced, but I suppose it depends on what is actually in your water. I'd say have it tested and then decide.

thanks Bama, the water has always LOOKED great. Clear and clean except the sand I'm having to vacuum off the bottom (we are still constructing the patio around it, this is a DIY so we are slow) we have swam in it every weekend and it FEELS good- it was just waiting for a problem with no FC...

okay, tested last night (just couldn't stand it, lol) and had FC=1, CC=0, TC=0.5, pH= 7.5!!, T/A=300, CH=300, CYA=0 this was after the one gallon of muratic acid. I then added one gallon of liquid bleach and when I tested this morning I have- FC= 6.5, CC=0.5, TC=7, pH= 7.2, T/A= 280, CH=300...

thanks guys, I did add a gallon of muratic acid today and then went & bought liquid chlorine. I'll test in the morning and see if I need more acid or if its time to add chlorine. And, Yes these numbers are from my new test kit. Where do I get the CYA from? Think I'll go back & read the pool...

Okay, after 2 gallons of liquid shock circulated for2 days my results are FC- 0, CC- 0, TC -0, pH -8.2, T/A -400, CH -500, CYA-0 this was with my tab chlorinator set on 2. So I went up to 3 twenty-four hours ago & just tested again and it's not much better FC -0.5, CC -0, TC -0.5, pH -8.2, T/A...

I have the TF100 test kit on the way!!! I'll let ya know what I find when it gets here :)

Thanks for the responses. @robl45, I would just like to get one that does the most thourough job possible. I'm really not too lazy to brush the ledge off :)

okay, decided to check my tap water with the strips JUST to get an idea, even if it isn't as accurate as a kit will be & here is what I found: pH 7.2, FC 0.5, TA 240 (highest on the strip) & stabilizer (is this CYA?) 30-50

they just gave me test strips, guess I need to get a kit before adding chemicals since I have no idea what is in my well water. I will report back ASAP to get opinions. Thanks!

Hello, we just had our pool installed this weekend and will have our water level up to the jets today and be able to turn on the pump. We live in the country and have very hard water (leaves white build up on everything) we did use our well water for filling. Should I poor straight clorox into...

Not sure if this has been covered yet, I looked back several pages & didn't find it, so here goes: We just got our 15x34 Fiberglass pool installed this weekend :whoot: Now I am looking for a robot cleaner. There is no 'toe-kick' on this pool like on some fiberglass BUT We have a rather large...

No close neighbors, so that won't work. Someone suggested putting a timer on our water well to run about 20 min then shut off for 5 min to prevent over heating. Anyone think that would be helpful???? I still can't find a truck but about to call the fire dept, unfortunately we only have a small...

We are installing this weekend!!! I'm concerned about burning out our waterwell pump but having trouble finding a water hauling truck for hire or rent! How have you all filled your pool at original install???

so glad to see that I am not the ONLY one that this is happening to!! I'm very frustrated with it right now! Good thing I love the info that I find here so much or I'm at the point that I wouldn't even bother. It must be an issue with this forum because it doesn't happen on any other site I...

we are currently trying to install the Viking Fiji (if it would STOP raining in South Texas) , it is 15x34x6 and we will have one skimmer placed where the prevailing wind helps clear debris, and 4 returns. No maindrain. This is what was recommended by the PB and we are doing an assisted install-...

Install will be in less than 3 weeks , the PB will be installing the skimmer & 4 eyeball returns before transporting to my home. Since this is an assisted/DIY, they have not made a site visit so I'm not sure how they are going to figure on positioning. How important is the normal wind direction...

thanks Scott! I knew we had to do a collar, but we are doing an assisted install (basically buying the kit & doing all the labor & contracting out electric and concrete) and the schematic is somewhat unclear about the dimentions of the collar. A 3' x 4" is what I figured on, just needed to know...

Sorry, I should have included that ;o) It will be the Viking Fiji fiberglass pool, 15x34.

We are using pavers up to the edge of our pool so the concrete will be below grade with the pavers over the top. How wide & deep does the concrete have to be to stabalize the pool?