Search results

Thank you for the replies everyone. This clears things up for me.

Thanks for the info on the DPD, and CC. I did not know about the extra drop in that test.

Hello Everyone, When I am testing using drop tests with Taylor what do I consider my end point? For example: If testing alkalinity, at drop 10 the water turns red, at 11 drops it turns darker red, at 12 drops there is no change. Do I call it 100, 110, or go between the two, and call it 105? I...

Thank you everyone. I am going to add the Taylor K-2006C to my pool testing equipment, and wasn't sure if I needed the DI water for some testing with the K-2006C, or for rinsing. Sounds like I do not need it. I appreciate every ones input. Won't be long now, spring has sprung. Pool water is...

Thank you, sounds like I do not need it for rinsing. Do you ever need the DI water for testing purposes?

Is DI water a necessity to have with a good test kit? Do you all use it very often? Do you rinse your mixing tubs with regular water, distilled water, DI water? Just trying to get things figured out before I purchase to make sure I get everything I need. I have been using a ColorQ Pro 7, but...

Thank you for your input. I will check check out TF Testkits.net.

Hello Everyone, I have a 27' round above ground residential pool, 17,200 gallons. For years I depended on my pool store for testing. I then bought a Lamotte Color-Q Pro 7, and have been using that with decent results, although I believe the alkalinity, and hardness tests can be questionable. I...

My H150 milivolt heater sooted up a month ago, and has been giving me problems ever since. I thought I had cleaned the heat exchanger good enough to run, but it keeps shutting off. Replaced the pilot assembly which now it runs for a few hours, but still shuts off, it is shutting the pilot off...

Thank you for your reply. I may have a problem with the inline check valve. It could be broke causing a flow issue. I noticed when I had the heater disconnected the flow seemed improved.

Hello Everyone, I have a Hayward H150 Millivolt gas heater, 13 years old. I replaced the header this spring as it had cracked last winter. Only the header was new, I used all the old components on the header. The heater has been working fine, with the exception of what I think may be a short in...