Search results

Thanks for all the ideas :-)

My neighbor, who also has a pool found water under her foundation last week when construction people were adding pillars to her foundation. To the best of my knowledge I didn't and don't have a leak. I just completed a 24hr bucket test and did not see any difference between the inside /...

Thanks for the feedback Yes - i could hook it up this way and put the SWG on the secondary timer - however - that timer is used for my booster pump for my Polaris 280. I also have an aquabot axiom robot that i pulled out again for this season and am going to try to use it vs my Polaris as it...

Problem - I have a VS speed pump (Pentair Intelliflo -3HP) and want to add a SWG that only turns on when the pump is on 1) I want to use my pump’s timer and thermal protection for turning pump on and off 2) I want to run pump at around 1500 rpm as that speed appears to be the lowest I can get...

James Thank you for your advice. I was able to 1) Disconnect the basket section from the pump 2) Cut the bottom 1/3 of the basket off 3) I was now able to turn the basket 360 degrees and was able to remove it from the pipe - it was attached with dope instead of cement So bottom line is I...

Thanks JamesW Looks like I can just remove the vacuum breaker piece when i do the upgrade. I will plumb it straight to waste. My real dilemma is how to remove my old pump and have enough pipe left to install the new Pentair. As you can see in the second picture above, the is very little pipe...

I've decided to replace my old and failing PacFab DE Filter and 2HP single speed pump. For the upgrade I purchased - Pentair 011018 IntelliFlo 3HP pump - Pentair FNS Plus 60 Sq Ft DE filter (upgraded from 48 Sq Ft) - Pentair 261152 2" Multiport Valve - CMP Hi-Temp Unions 2" - Eaton CHSPT2ULTRA...