Search results

Giving this thread a resurrection of sorts… @rstrouse @MyAZPool Any idea if DashPanel will work with new IntelliCenter 3.004 FW? I debating being a guinea pig but opted to ask first. Edit: Not sure why this was moved as it was pertinent to the existing thread, but this is certainly fine!

This is perfect! Thanks! Did a test print with PLA and no adjustments needed. Will print with ASA before opening pool next year.

Jim, Can you elaborate on this? Our pool came with one (now 4 years old) and I’ve been curious as to when it needs to be changed out, if ever. Not opposed to removing it all together.

They do sell online, but arguably worth calling them for incredible service to help you identify an ideal robot. https://marinapoolspaandpatio.com/

Full disclosure…. I did that too (well, I flipped the housing, not the wires) :) Easy fix and now I’ve etched proper orientation marks in the black housing, brass cap and aluminum base for any future work.

Our SE had the same exact same issue (and also had the same pinched wire, that is normal). I rebuilt the impeller motor (new o-rings, carbon brushes and bearings) and that solved it.

I just ordered a rebuild kit from the same seller! Great service and shipped it out within an hour of me paying. No complaints. His already rebuilt motor looked like a great option as well!

I run our pump 24/7. 1600 RPM for salt generation (SWCG is set at 30% and we always have 7ppm FC) and then 3, one-hour runs at 2800 RPM for skinning (once every 8 hours).

Have you tried troubleshooting it? Our 4 year old Warrior just failed. A few YouTube videos and $8 in parts and we’re back up and running (I serviced the impeller motor). Took about 40 minutes.

When you replaced the black barrel cover that has the two magnets back on the motor, seems like you may have rotated it 180 degrees. I did the same thing and had the same experience. Opened it back up, rotated it back to proper orientation and that fixed it.

Resurrecting this. Our robot (Warrior SE) would suddenly stop after starting. $22 later and all fixed (cost of bearings and puller). This video was great! Few notes: Yup, I rotated the magnetic cover/barrel 180 degrees. Robot starting sucking water rather than expelling. Luckily only took...

This may help: https://tftestkits.net/R-7065-CYA-Standard-50ppm-2oz-p97.html At least it gives you a mid-point comparator/standard to evaluate against your water.

https://marinapoolspaandpatio.com/product/maytronics-dolphin-99958907-diy-cable-18m-with-swivel/

Rehashing this old thread as I am about to order our initial replacement/spare filters. Any chance you can share the STL or 3MP file for the “cover” you printed?

Sent a message as mine will need parts soon (and would never hurt to have some on hand).

Fantastic first post! I never got around to calling Pentair (because life, wife, kids and work) but this fixed the problem right away! Apparently my body of water was named "Pool" but never actually set as a pool. Thanks for this!

What’s the easiest way to do that (where there’s a chance it will be seen)?

Yeah, the app home page says “pool” but under chemistry the IC is stuck as a “spa”. Can’t figure out how to change that…

Same here. Our IC40 is going on its 4th year. Just checked out the cells out of curiosity. Looks brand new, so I reassembled it and went on with my day :)

I recently moved over to Pentair Home app from IC2 app. I know noticed that the app has a maximum setting of 20% on my IC40. Luckily I use PoolController instead of Pentair’s app, so I can set whatever generation percentage I want. Anyone else seeing this issue or have a fix in the new Home...

I clearly missed the liner slipping out from the corner photo. Yeah, that should be addressed. Sorry about that!

We’ve seen worse!! There’s far worse things than a frog orgy that could have been in the skimmer. Just starting working on the solids, test out the equipment and then start slamming.

I did add some polyquat and I simply filled a floating chlorine puck holder with 3 chlorine tabs. I’ll test out the chemistry in the morning to see where I am. I am running out SWG at 60% just overnight (normal set at 30% and we have about 7-8 Chlorine level every day).

Closed our pool for the first time by myself in October. Opened it absolutely clear water (solid cover) and apparently I lowered the worm population significantly. No complaints at all! Robot is currently doing it’s job and I’ll manually vacuum sun ledge when it cools down outside. Yes...

Here’s my setup: https://www.amazon.com/gp/aw/d/B000WQZCQO https://www.amazon.com/gp/aw/d/B00274SLK8 https://www.amazon.com/gp/aw/d/B07TFYX622 Very happy with it. 4 years running.

We've had our FG pool for 4 years now. The only line that ever has any antifreeze is the skimmer line (single skimmer). I just closed our pool myself for the first time and did the same things they did. Ran the cyclone and capped the returns while the air was moving (and ton of air, so...

And even covered it myself. Thanks everyone for support and guidance!

OCLT passed. Started closing today. Super easy with the modified lid!