Search results

Solved: After all that, I took the cell to another pool store to get a second opinion and it failed. I took it back to the original pool store and it failed there this time also. The cell is 4 years old so I guess I got my money's worth. Now to start working on the leaky pool lights...

I pulled the main board and there is discoloration around resistor R23. Does anybody have a schematic of the main board to see if R23 has anything to do with measuring salt level?

I tried wiggling the cable from the cell to the connection to the unit. Reading was steady. The salt reading is about 1000 ppm low. Until I figure this out, I am considering adding salt to raise the level to 3700. The unit will think the level is 2700 and should work. Any problem with...

I live in Texas so the water is well above 70 (82 to 84 degrees). I asked the pool store to check the cell twice. Of course, he could have run it wrong both times. He was using an Aquarite test set up in the store. I have removed and reinstalled the cable several times. I will wiggle...

I have an Goldline/Aquarite SWG. The unit is about 7 years old. The cell was replaced about 3 years ago. The salt level on the unit reads 1700, but the salt level is actually 2800 (tested with strips and the pool store). Since the SWG thinks the salt level is low, it shows low salt and check...