Search results

Thank you both. Water is definitely green but the filter didn't seem clogged to the point it would restrict flow. However, I think a drain and refill is in order.

Hello, I've been fighting a filter issue since May on my 35 year old pool. So far I've replaced the back flush valve, filter grids and the filter manifold all of which were faulty. My issue now is that I clean the filter and I get great flow for 20 minutes with the water cascading over my hot...

I'm replacing all of the junction boxes now. So not yet.

Thank you for the confirmation. Now I am going down the slippery slope and replacing the 35 year old electrical junction box that feeds the control center.:giggle:

Hello Jimrahbe, I assume that the Yellow and Black wires on the Right side of the blue block is your L1 and L2 (240 volts) inputs from a circuit breaker. Is that correct? That is correct, but what I was confused about was if it makes a difference if the Black wire or Yellow wire is on top. I...

I received my upgrade kit and I just wanted to make sure I have my transformer wired correctly. I believe Black is hot and the picture with the blue block is how I have it wired now. I need to affix the new sticker but I might buy a new box. If I understand correctly, I don't need any of...

Thank you 1poolman1, I will order the #521247 Compool to Pentair EasyTouch 8, Pool and Spa Control System Upgrade Kit w/Transformer.

Hello, After nursing my old compool controller along for decades, it is now down to one working circuit which I have connected to the main pump. So it looks like I will need do the Compool to Easytouch Upgrade to get my Polaris working again. The question is, do I need to get the one with a...

Thank you !

Thank you ajw22. What should I used to fix the crack?

Hello, I had a some tiles pop off during the record winter we had Texas. This also revealed a crack that was not repairs when I had the tiles and plaster done in 2014. The crack has been there since I purchased the house in 2002 and I have not noticed leaks as it appears to be above the water...

Thank you both!

Thank you Jimrahbe, The outside was cracked so I'm replacing the valve. The direction of flow the way the current valve is installed towards the old brass valve with the blue knob. Water was flowing the other direction against the valve when the pipe burst. Now I question as to whether it...

Hello, I'm in Texas and during the unprecedented cold weather I had the Jandy backflow valve coming from my hot tube/spa freeze and crack. The Jandy valve was installed when the spa heater started leaking and the heater was bypassed maybe 15 years ago. Now that I'm looking at repairing that...

IT LIVES !!!!!! Thank you for walking me through this !!!!